首页> 外文会议>ASME International Conference on Ocean, Offshore and Arctic Engineering >SOFTWARE SIMULATION AND EXPERIMENTAL STUDY ON WAX DEPOSITION PATTERN OF DEEP CONDENSATE GAS
【24h】

SOFTWARE SIMULATION AND EXPERIMENTAL STUDY ON WAX DEPOSITION PATTERN OF DEEP CONDENSATE GAS

机译:深层凝析气蜡沉积规律的软件模拟与实验研究

获取原文

摘要

The Bozi block of Tarim Oilfield is a typical tight sand condensate gas reservoir with serious wax plugging issue. It is necessary to study the phase behavior and the wax deposition pattern of well fluids in Bozi gas reservoir, which provides the phase enveloping diagram of the condensate gas and can help to control the paraffin deposition. In this study, the PVT tester and self-designed microscopic solid deposition tester are used to get the phase enveloping curve of the condensate gas, which is combined with software simulation results and production data of Bozi 104 well to analyze wax deposition from formation to wellbore, wellbore to ground and surface pipeline. The main conclusions and suggestions are as follows: with different temperature and pressure, condensate gas produces different phase regions such as gas phase, gas-liquid phase, gas-solid phase, gas-liquid-solid phase, etc. Above the dew point pressure, the WAT is less impacted from pressure while the WAT gradually decreases due to the dissolution effect below the dew point pressure. The experimental results are used to revise the software simulation results and then to obtain the phases of different temperature and pressure regions. The state envelope is used to predict the liquid separation and wax production situation at different production stages; the liquid condensation and waxing area of the Bozi 104 well lies in the surface pipeline behind the nozzle, where appropriate wax prevention measures are needed.
机译:塔里木油田博兹区块是典型的致密砂凝结气藏,存在严重的蜡堵问题。有必要研究渤子气藏中井流体的相行为和蜡沉积模式,提供凝析气的相包络图,有助于控制石蜡的沉积。本研究利用PVT测试仪和自行设计的微观固体沉积测试仪获得凝析气的相包络曲线,并结合Bozi 104井的软件模拟结果和生产数据,分析了从地层到井筒的蜡沉积。 ,井筒到地面和地面管道。主要结论和建议如下:在不同的温度和压力下,凝析气会产生不同的相区,例如气相,气液相,气固相,气液固相等。高于露点压力,WAT受压力的影响较小,而WAT由于在露点压力以下的溶解作用而逐渐降低。实验结果用于修正软件仿真结果,然后获得不同温度和压力区域的相位。状态包络用于预测不同生产阶段的液体分离和蜡的生产情况; Bozi 104井的液体冷凝和打蜡区域位于喷嘴后面的地面管道中,需要采取适当的防蜡措施。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号