首页> 外文会议>International conference on nuclear engineering >MODELING OF BUBBLE BEHAVIOR IN LOW VOID FRACTION SUBCOOLED FLOW BOILING
【24h】

MODELING OF BUBBLE BEHAVIOR IN LOW VOID FRACTION SUBCOOLED FLOW BOILING

机译:低空隙分数过冷沸腾沸腾中气泡行为的建模

获取原文

摘要

In predicting the void fraction in subcooled flow boiling, accurate evaluation of single bubble behaviors is of considerable importance. In particular, bubble lift-off velocity affects the void fraction significantly since the bubble disappear quickly due to heat transfer with subcooled liquid if the lift-off velocity is high. In this study, the process of bubble lift-off was experimentally investigated to develop mechanistic correlations for the bubble lift-off velocity. In the development of the correlations, it was assumed that the bubble lift-off velocity in the horizontal direction is proportional to the bubble growth rate and that in the vertical direction is determined primarily by the local liquid velocity evaluated at the bubble center position. Then, impact of the bubble lift-off velocity on the void fraction was explored through numerical simulations. In the simulations, the bubble lift-off velocity in the lateral direction was parametrically changed. It was shown that the mean void fraction decreases with an increase in the lateral bubble lift-off velocity since the bubble condensation is enhanced. It was therefore confirmed that accurate evaluation of the bubble lift-off velocity is important for high accuracy prediction of the void fraction.
机译:在预测过冷流沸腾中的空隙率时,准确评估单个气泡的行为非常重要。特别地,气泡剥离速度对空隙率有显着影响,因为如果剥离速度高,气泡会由于与过冷液体的热传递而迅速消失。在这项研究中,通过实验研究了气泡剥离的过程,以建立气泡剥离速度的机械相关性。在相关性的发展中,假设水平方向上的气泡提起速度与气泡的生长速度成比例,而垂直方向上的气泡提起速度主要由在气泡中心位置评估的局部液体速度确定。然后,通过数值模拟探讨了气泡提离速度对空隙率的影响。在模拟中,沿横向方向的气泡剥离速度被参数化地改变。结果表明,由于气泡凝结作用的增强,平均空隙率随横向气泡提起速度的增加而降低。因此,可以肯定的是,气泡剥离速度的准确评估对于空隙率的高精度预测很重要。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号