首页> 外文会议>Conference on sensors, MEMS, and electro-optical systems >Measurement of luminance and color uniformity of displays using the large-format scanner
【24h】

Measurement of luminance and color uniformity of displays using the large-format scanner

机译:使用大幅面扫描仪测量显示器的亮度和色彩均匀度

获取原文

摘要

Uniformity of display luminance and color is important for comfort and good perception of the information presented on the display. Although display technology has developed and improved a lot over the past years, different types of displays still present a challenge in selected applications, e.g. in medical use or in case of multi-screen installations. A simplified 9-point method of determining uniformity does not always produce satisfactory results, so a different solution is proposed in the paper. The developed system consists of the large-format X-Y-Z ISEL scanner (isel Germany AG), Konica Minolta high sensitivity spot photometer-colorimeter (e.g. CS-200, Konica Minolta, Inc.) and PC computer. Dedicated software in LabView environment for control of the scanner, transfer the measured data to the computer, and visualization of measurement results was also prepared. Based on the developed setup measurements of plasma display and LCD-LED display were performed. A heavily worn-out plasma TV unit, with several artifacts visible was selected. These tests show the advantages and drawbacks of described scanning method with comparison with 9-point simplified uniformity determining method.
机译:显示器亮度和颜色的均匀性对于舒适性和对显示器上显示的信息的良好感知至关重要。尽管显示技术在过去几年中已经发展和改进了很多,但是不同类型的显示器在选定的应用中仍然提出了挑战,例如显示器。在医疗用途或多屏安装的情况下。一种简化的确定均匀性的9点方法并不总是能获得令人满意的结果,因此本文提出了另一种解决方案。开发的系统由大型X-Y-Z ISEL扫描仪(isel Germany AG),柯尼卡美能达高灵敏度点光度计色度计(例如CS-200,柯尼卡美能达有限公司)和PC计算机组成。 LabView环境中用于控制扫描仪,将测量数据传输到计算机以及测量结果可视化的专用软件也已准备就绪。基于开发的设置,进行了等离子显示器和LCD-LED显示器的测量。选择了严重磨损的等离子电视,其中可见一些伪像。这些测试与9点简化均匀性确定方法相比,显示了所述扫描方法的优缺点。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号