首页> 外文会议>International Conference on Ubiquitous and Future Networks >Low latency IFFT design for OFDM systems supporting full-duplex FDD
【24h】

Low latency IFFT design for OFDM systems supporting full-duplex FDD

机译:支持全双工FDD的OFDM系统的低延迟IFFT设计

获取原文

摘要

In this paper, we describe a low latency Inverse Fast Fourier Transform (IFFT) design method for OFDM systems supporting full-duplex Frequency Division Duplex (FDD). To support full-duplex FDD OFDM systems means that transmission and reception are simultaneously performed. In order to reduce the IFFT output latency, we propose the reordering scheme of IFFT input data. By using the reordered IFFT input data, both the output latency and the memory size in the first stage of IFFT are significantly reduced. In the OFDM systems, input data of the IFFT corresponding to guard band are assigned as null. Low latency IFFT design method is proposed based on the fact that there are many null as an input data of IFFT. The proposed method focuses on reducing the memory size in the first stage of single-path delay feedback (SDF) IFFT architectures since the first stage occupies about 50% of the overall memory. To verify the efficiency of the proposed method, 2048-point IFFT with radix-2 SDF architecture is used and reduced about 41% compared with conventional architecture.
机译:在本文中,我们描述了一种支持全双工频分双工(FDD)的OFDM系统的低延迟低傅立叶逆变换(IFFT)设计方法。为了支持全双工FDD OFDM系统,意味着同时执行发送和接收。为了减少IFFT输出延迟,我们提出了IFFT输入数据的重新排序方案。通过使用重新排序的IFFT输入数据,IFFT第一阶段的输出等待时间和存储器大小均显着降低。在OFDM系统中,将与保护带相对应的IFFT的输入数据分配为空。基于IFFT的输入数据存在大量空值的事实,提出了一种低等待时间的IFFT设计方法。所提出的方法着重于减小单路径延迟反馈(SDF)IFFT架构的第一阶段的存储器大小,因为第一阶段占据了整个存储器的50%左右。为了验证所提出方法的效率,使用了具有基数2 SDF架构的2048点IFFT,与传统架构相比,该点减少了约41%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号