首页> 外文会议>ASME international conference on ocean, offshore and arctic engineering >Study of Seabed Trench Induced by Steel Catenary Riser and Seabed Interaction
【24h】

Study of Seabed Trench Induced by Steel Catenary Riser and Seabed Interaction

机译:钢悬链线上升与海床相互作用引起的海床海沟研究

获取原文

摘要

Seabed trench profile has significant effect on the fatigue damage of steel catenary riser near touchdown point. This study briefly demonstrates an approach in literature to determine the seabed trench induced by wave frequency response based on the cubic polynomial model. In this approach, a criterion for the matching between catenary riser and seabed trench is proposed, which is an optimization problem, and needs iterative static analysis of catenary riser. Based on the criterion, the sensitivity of the trench length and position to three parameters is parametrically studied: riser mass per unit length, ratio of horizontal span to vertical span of catenary part, trench depth. The obtained data are employed to fit the equations of trench length and position, which is taken as surrogate model since the iterative static analysis is very complicated. For completeness, the validation against data obtained from hysteretic seabed model is also illustrated. Based on the surrogate model, this study investigates the effect of trench depth on the fatigue damage near touchdown and the effect of the low frequency response on the seabed trench, and some useful conclusions are obtained.
机译:海底沟槽轮廓对着陆点附近的钢悬链立管的疲劳损伤有重要影响。这项研究简要地证明了文献中基于三次多项式模型确定由波频率响应引起的海底沟槽的方法。在这种方法中,提出了悬链线与海床沟槽之间的匹配准则,这是一个优化问题,需要对悬链线进行迭代静态分析。根据该标准,对沟槽长度和位置对三个参数的敏感性进行了参数研究:每单位长度的立管质量,悬链线部分的水平跨度与垂直跨度之比,沟槽深度。所获得的数据用于拟合沟槽长度和位置的方程,由于迭代静态分析非常复杂,因此可以将其用作替代模型。为了完整起见,还说明了针对从滞后海床模型获得的数据的验证。基于替代模型,本文研究了沟槽深度对接地附近疲劳损伤的影响以及低频响应对海床沟槽的影响,并得出了一些有用的结论。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号