Depressurization and Entrainment TEst Loop (ADETEL) modeled after AP1000 with a scaling ratio of 1:5.6 was constructed to investigate the entrainment and depressurization behavior after the actuation of ADS-4 valves. The entrainment and depressurization features were investigated under different initial pressure, mixture liquid level in the pressure vessel and heating power. The entrainment deposition effect of reactor internals was also investigated. The test data reveals that large amount of water are entrained through the ADS-4 branch line within a short period of time. The liquid entrainment rate and the reduced rate of the mixture liquid level in the pressure vessel increase with the initial system pressure. It is notable that the core uncovery was experienced when the initial pressure was set as 0.5MPa in current experimental conditions. The reactor internals have little effect on the entrained mass and the mixture liquid levels in the pressure vessel. The correlation has been fitted after the Welter.et al' model for the entrainment onset and entrainment rate, which can be applied in RELAP5 as the simulation investigation.
展开▼
