Modified dual band gysel power divider with isolation bandwidth improvement

摘要

This paper presents a new design of a dual band power divider with high power handling capability and isolation bandwidth improvement, which contains six branch line sections, two grounded resistors, one resistor between output ports, an extension line at the input, and a single stub line at the end. Exact closed-form equations are derived for the proposed structure using even-mode and odd-mode analysis. In this design, flexibility in choosing two grounded resistors enables us to determine the frequency ratio range, bandwidth of the circuit, and the level of power handling capability. In addition, line admittance analysis shows that the proposed structure can support the acceptable frequency ratio range. For verification, the proposed structure is simulated, fabricated and measured using microstrip lines. Simulation and measurement results show wide isolation bandwidth, while maintaining high power handling capability over the Wilkinson power divider.