首页> 外文会议>European Radar Conference >122 GHz single-chip dual-channel SMD radar sensor with integrated antennas for distance and angle measurements
【24h】

122 GHz single-chip dual-channel SMD radar sensor with integrated antennas for distance and angle measurements

机译:具有集成天线的122 GHz单芯片双通道SMD雷达传感器,用于距离和角度测量

获取原文

摘要

This paper presents a single-chip, dual-channel Surface-Mounted-Device (SMD) radar sensor with two integrated on-chip antennas operating at D-band. The design comprises of a fully integrated transceiver circuit with quasi-monostatic architecture and a 60GHz push-push voltage-controlled-oscillator (VCO) that operates between 114 GHz and 124 GHz. All analog building blocks have digital-control interfaces and are controlled via a serial-peripheral-interface (SPI) to reduce the number of bond-pads and facilitate the communication between digital processor and analogue building blocks. The two electromagnetically coupled patch antennas are placed on the top of the die with 9-dBi gain and have a simulated efficiency of 60%. The chip consumes 450mW and is wire-bonded in an open-lid 5mm × 5mm quad-flat no-leads(QFN) package. Appropriate signal processing for the estimation of range, and azimuth angle in multiple object situation is presented.
机译:本文提出了一种单芯片,双通道表面贴装设备(SMD)雷达传感器,该传感器具有两个在D波段工作的集成片上天线。该设计包括一个具有准单静态架构的完全集成收发器电路和一个工作在114 GHz至124 GHz之间的60GHz推压压控振荡器(VCO)。所有模拟构建块均具有数字控制接口,并通过串行外围接口(SPI)进行控制,以减少键合台的数量,并促进数字处理器与模拟构建块之间的通信。两个电磁耦合的贴片天线以9 dBi的增益放置在芯片的顶部,并且具有60%的模拟效率。该芯片功耗为450mW,并采用开放式5mm x 5mm四方扁平无引线(QFN)封装进行引线键合。提出了在多目标情况下估计距离和方位角的适当信号处理方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号