首页> 外文会议>International Conference on Transparent Optical Networks >Finite-Size and Disorder Effects on Slow-Light Propagation in an Extended Photonic Crystal Coupled-Cavity Waveguides with Group-Index Bandwidth Product Exceeding 0.47
【24h】

Finite-Size and Disorder Effects on Slow-Light Propagation in an Extended Photonic Crystal Coupled-Cavity Waveguides with Group-Index Bandwidth Product Exceeding 0.47

机译:有限尺寸和混乱对扩展光子晶体耦合腔波导中慢光传播的影响,具有超过0.47的基团指数带宽产品

获取原文

摘要

Slow light propagation through engineered band dispersion in photonic structures is a highly promising tool for realizing integrated optical delay lines and efficient photonic devices through enhanced optical nonlinearities. A primary goal is to achieve devices over the largest possible bandwidth with large group index and minimal dispersion (i.e. approximately constant group index), flat transmission spectrum, which otherwise would hinders their use for pulse propagation, with setbacks such as pulse distortion and generation of echoes, thus enabling multimode and pulsed operation. We present an experimental proof of record-high group-index bandwidth product (GBP = ng?ω ? ω) in genetically optimized coupled-cavity waveguides (CCWs) made of staggered modified L3 photonic crystal cavities. The optimization procedure was applied to the unit cell to achieve maximal GBP combined with low losses. The resulting designs were realized in Si slabs, where CCWs of length ranging between 50 and 800 cavities were fabricated. The samples were characterized by measuring the CCW transmission, the mode dispersion and the group index ng through Fourier-space imaging. Various cavity designs were investigated, with theoretical group index ranging from ng= 37 to ng> 100. Record-high GBP = 0.47 was demonstrated over a bandwidth approaching 20 nm, with ng= 37, a very homogeneous flat-top transmission profile and losses value below 67 dB/ns. On a different design, an average ng= 107 with 15% variation over 7.4 nm was measured. These values range among the best ever demonstrated for a silicon device. Through Fourier-space imaging, slow light properties are directly extracted by reconstructing the dispersion maps, allowing distinguishing finite-size effects from those arising due to structural disorder. We elucidate the influence of the CCW length and design on the adherence of the dispersion to the theoretically predicted periodic-boundary profile. Limitations on slow-light propagation are identified in terms of decay length and the onset of diffusive light transport, considering state-of-the-art fabrication. For such systems where light propagation relies on a resonant tunnelling mechanism, we show that disorder has a cumulative effect on the device response, ultimately capping the achievable slow-down factor. With the aid of Raman spectroscopy, we further explain how the mitigation of stress in the layer is mandatory towards preventing light trapping in the waveguide, in order to retrieve the full operational bandwidth.
机译:通过光子结构中的工程带分散慢的慢光传播是通过增强的光学非线性实现集成光学延迟线和高效光子器件的高度有前途的工具。主要目标是通过大型索引和最小色散(即近似恒定组索引),扁平传输频谱来实现具有最大可能带宽的设备,否则会阻碍其用于脉冲传播的使用,诸如脉冲失真和产生的挫折回声,从而实现多模和脉冲操作。我们介绍了记录高组索引带宽产品的实验证明(GBP = N. g ?ω? ω)在遗传优化的耦合腔波导(CCW)中由交错改性L3光子晶体腔制成。优化过程应用于单位电池以实现最大GBP结合低损耗。由此产生的设计在Si板中实现,其中制造了50至800个腔之间的长度的CCW。通过测量CCW传输,模式分散和基团指数NG通过傅里叶空间成像来表征样品。调查了各种腔设计,具有从n的理论组指数范围 g = 37到n g > 100.录制高GBP = 0.47在接近20nm的带宽上进行了演示,n g = 37,一个非常均匀的平顶传输轮廓和损耗值低于67dB / ns。在不同的设计上,平均n g 测量= 107,测量了超过7.4nm的15℃。这些值范围是硅装置效果最佳的范围。通过傅里叶空间成像,通过重建色散图直接提取慢光性,允许区分从结构障碍引起的那些产生的有限尺寸效应。我们阐明CCW长度和设计对色散粘附到理论上预测的周期性边界轮廓的影响。考虑最先进的制造,根据衰减长度和扩散光传输的衰减识别对慢光传播的限制。对于光传播依赖于谐振隧道机制的这种系统,我们表明该病症对设备响应具有累积效果,最终覆盖可实现的缓慢下降因子。借助拉曼光谱检查,我们进一步解释了如何在防止波导中的光捕获层中的压力减轻的压力,以便检索完整的操作带宽。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号