【24h】

TOWARDS A TECHNIQUE FOR NONLINEAR MODAL ANALYSIS

机译:迈向非线性模态分析的技术

获取原文

摘要

In this paper we discuss a theoretical technique for decomposing multi-degree-of-freedom weakly nonlinear systems into a simpler form - an approach which has parallels with the well know method for linear modal analysis. The key outcome is that the system resonances, both linear and nonlinear are revealed by the transformation process. For each resonance, parameters can be obtained which characterise the backbone curves, and higher harmonic components of the response. The underlying mathematical technique is based on a near identity normal form transformation. This is an established technique for analysing weakly nonlinear vibrating systems, but in this approach we use a variation of the method for systems of equations written in second-order form. This is a much more natural approach for structural dynamics where the governing equations of motion are written in this form as standard practice. In fact the first step in the method is to carry out a linear modal transformation using linear modes as would typically done for a linear system. The near identity transform is then applied as a second step in the process and one which identifies the nonlinear resonances in the system being considered. For an example system with cubic nonlinearities, we show how the resulting transformed equations can be used to obtain a time independent representation of the system response. We will discuss how the analysis can be carried out with applied forcing, and how the approximations about response frequencies, made during the near-identity transformation, affect the accuracy of the technique. In fact we show that the second-order normal form approach can actually improve the predictions ofsub-and super-harmonic responses. Finally we comment on how this theoretical technique could be used as part of a modal testing approach in future work.
机译:在本文中,我们讨论了一种将多自由度的弱非线性系统分解为更简单形式的理论方法,该方法与线性模态分析的众所周知的方法具有相似之处。关键的结果是,转换过程揭示了系统共振,包括线性共振和非线性共振。对于每个共振,可以获得表征骨干曲线和响应的高次谐波分量的参数。基本的数学技术基于近似恒等正态形式转换。这是一种用于分析弱非线性振动系统的成熟技术,但是在这种方法中,我们对以二阶形式编写的方程组使用了该方法的一种变体。对于结构动力学而言,这是一种更为自然的方法,其中,将运动的控制方程式以此形式编写为标准做法。实际上,该方法的第一步是使用线性模式进行线性模态转换,就像通常对线性系统所做的那样。然后,将近恒等式变换用作该过程的第二步,并确定正在考虑的系统中的非线性共振。对于具有三次非线性的示例系统,我们将说明如何将所得的变换方程式用于获得系统响应的时间独立表示。我们将讨论如何通过施加的强制进行分析,以及在近恒身份转换过程中做出的有关响应频率的近似值如何影响该技术的准确性。实际上,我们证明了二阶法线形式方法实际上可以改善对次谐波和超谐波响应的预测。最后,我们对这种理论技术如何在将来的工作中用作模态测试方法的一部分进行了评论。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号