首页> 外文会议>International Conference on Electrical and Computer Engineering >Novel diagnosis technique of mass unbalance in rotor of induction motor by the analysis of motor starting current at no load through wavelet transform
【24h】

Novel diagnosis technique of mass unbalance in rotor of induction motor by the analysis of motor starting current at no load through wavelet transform

机译:通过小波变换的电动机启动电流分析电动机转子在电动机转子中的大规模诊断技术

获取原文

摘要

This paper presents an improved technique for detection of mass unbalance in rotor of an induction motor by the analysis of transient stator current during starting period using both discrete wavelet transform (DWT) and continuous wavelet transform(CWT). The unbalanced magnetic pull due to centrifugal force developed for mass unbalance in rotor produces excessive vibration in the rotor as well as in the stator, resulting changes in air gap flux distribution which induces voltage in the rotor and in the stator and generation of unique signature pattern in the stator current. During starting, unbalanced magnetic pull is very high, the rotor is pulled across the whole air gap which increases the amplitudes level of the harmonics already present and generation of new harmonics due to this fault in the stator current. In the present paper, the starting current at no load is captured and analysed for diagnosing the motor fault. As motor current signature (MCS) significantly depends on loading condition of the induction motor during steady state, the detection of faults using MCS at no load or light load by FFT technique is difficult. This has been overcome by this proposed improved technique as motor current does not depend on load and is very high even at no load during starting. This technique has been developed and implemented in the laboratory using machine fault simulator.
机译:本文介绍了在同时使用离散小波变换(DWT)起动期间和连续小波用于在由瞬时定子电流的分析的感应电动机的转子的检测质量不平衡的一种改进的技术变换(CWT)。不平衡磁拉力,由于在转子质量不平衡开发离心力产生过大的振动在转子以及定子,致使其诱导电压在所述转子和独特的签名图案的定子和产生的气隙磁通分布的变化在定子电流。期间开始,不平衡磁拉力非常高,转子在整个气隙增加已经存在和生成的新谐波谐波的幅值电平由于该故障在定子电流拉动。在本文件中,在无负载的起动电流被捕获并用于诊断电机故障分析。如电机电流签名(MCS)显著取决于稳定状态时的感应电动机的负载条件,使用在MCS由FFT技术无负载或轻负载的故障的检测是困难的。这已经克服这个提议改进技术作为电机电流不依赖于负载非常高,即使在无负载起动过程中。这种技术已经开发并使用机器故障模拟器在实验室中实现。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号