首页> 外文会议>Gas flow, chemical lasers, and high-power lasers >Optimisation of characteristics of a cw chemical HF laser with a new method for oxidising gas production
【24h】

Optimisation of characteristics of a cw chemical HF laser with a new method for oxidising gas production

机译:用一种新的氧化气体生产方法优化连续化学氟化氢激光器的特性

获取原文

摘要

The energy parameters of an HF laser operating by using a new method for oxidising gas production, which is based on the principle of two-region mixing, are optimised. The total amount of the inert diluent (helium) supplied to the laser was varied during experiments by varying its relative fraction only in the second mixing region. For an optimal relative fraction of the diluent in the second mixing zone and for an optimal position of the optical axis of the cavity under a constant pressure in the gas generator, the laser radiation power and the specific power output could be increased by 50% and 60 %, respectively, compared to the laser operation regime realised in our previous experiments. In this case, the inert diluent amount decreased by 35% and the length of the lasing length increased by 20 %.
机译:基于两区混合原理,优化了通过使用一种新的氧化气体生产方法工作的HF激光器的能量参数。通过仅在第二混合区域中改变其相对分数,在实验过程中改变了供应给激光器的惰性稀释剂(氦气)的总量。对于第二混合区中稀释剂的最佳相对比例以及在气体发生器中恒定压力下腔体的光轴的最佳位置,可以将激光辐射功率和比功率输出提高50%,并且与我们之前的实验中实现的激光操作方案相比,分别降低了60%。在这种情况下,惰性稀释剂的量减少了35%,激射长度的长度增加了20%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号