首页> 外文会议>International Conference on Information and Computing Science;ICIC '09 >Investigation on FEM Simulation of Bi-based Superconducting Composite Strip Roll Forming Based on ANSYS
【24h】

Investigation on FEM Simulation of Bi-based Superconducting Composite Strip Roll Forming Based on ANSYS

机译:基于ANSYS的双基超导复合带材成形有限元仿真研究。

获取原文

摘要

A micro-mechanics model of superconducting composite strip has been established. Based on this, in this study, an FEM model of superconducting composite strip was built by ANSYS. And then the forming process and results were simulated and analyzed. The results showed that when the rate of reduction is too large, the strip edge will break, and the cored wire will fracture, super-cored powder wire appears larger lateral cracks, which coincides with the experiment.
机译:建立了超导复合带的微力学模型。基于此,本研究利用ANSYS建立了超导复合带的有限元模型。然后对成形过程和结果进行了仿真和分析。结果表明,当压下率过大时,带材边缘断裂,药芯焊丝断裂,超药芯粉末焊丝出现较大的横向裂纹,与实验吻合。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号