【24h】

EXPERIMENTAL STUDY OF TURBULENT LOCAL ENHANCED HEAT TRANSFER IN WAVY-WALL CHANNEL

机译:波浪形通道内湍流局部强化传热的实验研究

获取原文

摘要

The aim of this study is to analyze the phenomena of heat transfer enhancement between two periodic sinusoidal walls for a single gas flow. The experimental set-up is characterized by a few geometrical parameters: amplitude of wall waviness (A); channel height (H); fin wavy-channel width (ω); fin period (e) and total wavy length (L). Combination of these ones is reduced to: the wall aspect ratio γ, the cross-section aspect ratio α and the channel spacing ratio ε. The Reynolds number defined on the hydraulic diameter and the bulk velocity is greater than 4000. A constant heat flux is maintained on the second lateral wall. For Re=5700, we observe an entrance region from the first to the fourth period; beyond, the velocity profiles are autosimilar. A shear layer is generated just downstream of the crest and develops in its wake up to the concavity area. Thermal experimental approach is performed by local measurements of convective heat transfer coefficient along the walls, within the viscous sublayer. The heat transfer profile presents an increasing from the crest of 15%, and the maximum is located at the first quarter of the period, close to the separated point. Beyond, the value of heat transfer decreases of 50% and the minimum is located close to the reattachment point. Then the heat transfer increases up to the next crest. The same phenomenon is observed in the next periods of the channel. To explain theses results, we calculate the turbulence terms obtained from the classical equations of fluid mechanics. The turbulence production (P) presents a maximum in the core of the shear layer, where the Reynolds constraints and the heat transfer are maxima. A good correlation is obtained between turbulence production and heat transfer. The flow pattern (mean, fluctuating and turbulence terms) are performed with PIV technique in order to analyze the vortices that develop in the shear layer, based on 1000 pairs of images.
机译:这项研究的目的是分析单个气体流在两个周期性正弦波壁之间传热增强的现象。实验装置的特征在于一些几何参数:壁波纹度(A);通道高度(H);鳍状波浪通道宽度(ω);翅片周期(e)和波浪总长度(L)。这些的组合减少为:壁长宽比γ,横截面长宽比α和通道间隔比ε。在水力直径和整体速度上定义的雷诺数大于4000。第二侧壁上保持恒定的热通量。对于Re = 5700,我们观察到从第一期到第四期的进入区域。除此之外,速度剖面是自相似的。剪切层刚好在波峰的下游产生,并在其唤醒后发展到凹面区域。通过对粘性子层内沿壁的对流换热系数进行局部测量来执行热实验方法。传热曲线从波峰处增加了15%,最大值位于周期的第一季度,靠近分离点。除此之外,传热值降低了50%,最小值位于重新连接点附近。然后,热传递增加到下一个波峰。在该信道的下一个周期中观察到相同的现象。为了解释这些结果,我们计算了从流体力学经典方程中获得的湍流项。湍流产生(P)在剪切层的核心处呈现最大值,其中雷诺约束和传热最大。在湍流产生和热传递之间获得良好的相关性。流动模式(均值,波动项和湍流项)是通过PIV技术执行的,以便基于1000对图像分析在剪切层中形成的旋涡。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号