首页> 外文会议>International Congress on High-Speed Photography and Photonics >Design of hybrid diffractive/ refractive optical system by the method of P-W-C
【24h】

Design of hybrid diffractive/ refractive optical system by the method of P-W-C

机译:P-W-C方法的混合衍射/折射光学系统的设计

获取原文

摘要

The structure parameter of hybrid diffractive/refractive optical system has been solved by the method of P-W-C. The primary aberration equation for diffractive system has been deduced. Combination of 3 pieces lenses , the diffractive/ refractive hybrid optical system was designed : No.l and No.3 are common glasses; No.2 is binary optical lenses (BOL). The results show: The Longitudinal Aberration is good in 0.6 and 0.8-0.9 apertures for the lenses. When frequency is 301p/mm, the modulation transfer function (MTF) is close to diffractive limit in 0.5 field angle; the modulation transfer function (MTF) is close to 0.7 in edge field. The design method can be used for diffractive/ refractive hybrid optical system.
机译:通过P-W-C的方法解决了混合衍射/折射光学系统的结构参数。 推导出衍射系统的主要像差方程。 设计了3件镜片,设计了衍射/折射混合光学系统:No.L和No.3是普通眼镜; No.2是二进制光学镜头(BOL)。 结果表明:纵向像差在0.6和0.8-0.9孔中良好的镜片。 当频率为301p / mm时,调制传递函数(MTF)靠近0.5场角度的衍射极限; 调制传递函数(MTF)接近边缘字段中的0.7。 设计方法可用于衍射/折射混合光学系统。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号