首页> 外文会议>Turbomachinery >ON THE PHYSICS OF FLOW SEPARATION ALONG A LOW PRESSURE TURBINE BLADE UNDER UNSTEADY FLOW CONDITIONS
【24h】

ON THE PHYSICS OF FLOW SEPARATION ALONG A LOW PRESSURE TURBINE BLADE UNDER UNSTEADY FLOW CONDITIONS

机译:非定常流动条件下低压透平叶片流动分离的物理研究

获取原文

摘要

The present study, which is the first of a series of investigations dealing with specific issues of low pressure turbine (LPT) boundary layer aerodynamics, is aimed at providing detailed unsteady boundary flow information to understand the underlying physics of the inception, onset, and extent of the separation zone. A detailed experimental study on the behavior of the separation zone on the suction surface of a highly loaded LPT-blade under periodic unsteady wake flow is presented. Experimental investigations were performed at Texas A&M Turbomachinery Performance and Flow Research Laboratory using a large-scale unsteady turbine cascade research facility with an integrated wake generator and test section unit. To account for a high flow deflection of LPT-cascades at design and off-design operating points, the entire wake generator and test section unit including the traversing system is designed to allow a precise angle adjustment of the cascade relative to the incoming flow. This is done by a hydraulic platform, which simultaneously lifts and rotates the wake generator and test section unit. The unit is then attached to the tunnel exit nozzle with an angular accuracy of better than 0.05°, which is measured electronically. Utilizing a Reynolds number of 110,000 based on the blade suction surface length and the exit velocity, one steady and two different unsteady inlet flow conditions with the corresponding passing frequencies, wake velocities and turbulence intensities are investigated using hot-wire anemometry. In addition to the unsteady boundary layer measurements, blade surface pressure measurements were performed at Re= 50,000,75,000,100,000, and 125,000 at one steady and two periodic unsteady inlet flow conditions. Detailed unsteady boundary layer measurement identifies the onset and extent of the separation zone as well as its behavior under unsteady wake flow. The results presented in ensemble-averaged and contour plot forms contribute to understanding the physics of the separation phenomenon under periodic unsteady wake flow. Several physical mechanisms are discussed.
机译:本研究是针对低压涡轮(LPT)边界层空气动力学的特定问题进行的一系列研究中的第一项,旨在提供详细的非稳态边界流信息,以了解起始,发作和程度的基本物理原理。分离区。进行了详细的实验研究,该实验研究了周期性非定常尾流作用下高负荷LPT叶片吸力表面上分离区的行为。实验研究是在德克萨斯A&M涡轮机性能和流量研究实验室中进行的,该实验使用了大型非定常涡轮级联研究设施,该设施具有集成的尾流发生器和测试段单元。为了解决LPT级联在设计和非设计工作点的高流量偏转问题,整个尾流发生器和测试段单元(包括横动系统)都经过设计,可以精确地调整级联相对于流入流量的角度。这是通过一个液压平台完成的,该平台可以同时提升和旋转尾波发生器和测试段单元。然后将该单元以优于0.05°的角度精度连接到隧道出口喷嘴,该角度精度可以通过电子方式进行测量。基于叶片吸力表面长度和出口速度,利用雷诺数110,000,使用热线风速仪研究了一个具有相应的通过频率,尾流速度和湍流强度的稳态和两种不同的非稳态入口流动条件。除不稳定边界层测量外,还在一个稳定和两个周期性不稳定入口流量条件下,在Re = 50,000、75,000、100,000和125,000的情况下执行叶片表面压力测量。详细的非稳定边界层测量可确定分离区的开始和范围,以及在非稳定尾流下的行为。以集合平均和等高线图形式表示的结果有助于理解周期性非定常尾流下分离现象的物理性质。讨论了几种物理机制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号