首页> 外文会议> >Measuring the link qualities in a frequency-hop packet radio network for use in the routing of multimedia packets
【24h】

Measuring the link qualities in a frequency-hop packet radio network for use in the routing of multimedia packets

机译:测量跳频分组无线网络中用于多媒体分组路由的链路质量

获取原文

摘要

A new method is described for routing multimedia traffic in a frequency-hop (FH) store-and-forward packet radio network. The new routing protocol is an extension of least-resistance routing (LRR), which bases route selection on the resistances for the routes from the source to the destination. The link resistance for LRR is a measure of the interference environment and other conditions that affect the probability that a FH radio can receive and forward a packet. For multimedia least-resistance routing (MMLRR), the link resistance for a given type of packet also accounts for the service requirements of that packet. MMLRR is illustrated for two types of traffic, each type having its own constraints on the number of errors and the delay. A typical application is the routing of voice and data packets in a multiple-hop network. In such an application, the voice packets cannot tolerate much delay, but they are allowed to contain a small number of errors. The data packets must be delivered error-free, even if a moderate delay is required to do so. The performance of MMLRR is measured by the throughput, end-to-end success probability, and delay which are obtained by computer simulation of a multiple-hop network of FH radios.
机译:描述了一种用于在跳频(FH)存储转发分组无线网络中路由多媒体流量的新方法。新的路由协议是最小电阻路由(LRR)的扩展,它基于从源到目标的路由的电阻来选择路由。 LRR的链路电阻是对干扰环境和其他条件的度量,这些条件会影响FH无线电设备可以接收和转发数据包的可能性。对于多媒体最小电阻路由(MMLRR),给定类型的数据包的链路电阻也考虑了该数据包的服务要求。针对两种流量类型说明了MMLRR,每种流量类型对错误数量和时延都有自己的约束。典型的应用是在多跳网络中路由语音和数据包。在这样的应用中,语音分组不能容忍太多的延迟,但是允许它们包含少量的错误。即使需要适当的延迟,也必须确保无错误地传送数据包。 MMLRR的性能通过吞吐量,端到端成功概率和延迟来衡量,这些吞吐量是通过FH无线电多跳网络的计算机仿真获得的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号