首页> 外文会议>Lidar Remote Sensing for the Environmental Monitoring VII; Proceedings of SPIE-The International Society for Optical Engineering; vol.6409 >Development of all-solid-state coherent 589 nm light source: toward the realization of sodium lidar and laser guide star adaptive optics
【24h】

Development of all-solid-state coherent 589 nm light source: toward the realization of sodium lidar and laser guide star adaptive optics

机译:全固态相干589 nm光源的开发:朝着实现钠激光雷达和激光导星自适应光学的方向发展

获取原文
获取原文并翻译 | 示例

摘要

We report an all-solid-state coherent 589 nm light source in single-pass sum-frequency generation (SFG) with actively mode-locked Nd:YAG lasers for the realization of sodium lidar and laser guide star adaptive optics. The Nd:YAG lasers are constructed as a LD-side-pumped configuration and are operated at 1064 and 1319 nm for 589 nm light generation in SFG. Output powers of 16.5 and 5.3 W at 1064 and 1319 nm are obtained with two pumping chambers. Each chamber consisted of three 80-W-LD arrays. Single transverse mode TEM_(00); M~2 ~1.1 is achieved with adjustment of cavity length considering thermal lens effect with increase of input LD power. The cavity length is set to approximately 1 m. Accordingly the mode-locked lasers are operated at a repetition rate of approximately 150 MHz. Synchronization of two pulse trains at 1064 and 1319 nm is accomplished by control of phase difference between two radio frequencies input in acousto-optic mode-lockers. Then temporal delay is controlled with a resolution of 37 ps/degree. Pump beams are mixed in periodically poled stoichiometric lithium tantalate (PPSLT) without an antireflection coating. The effective aperture and length of the crystal are 0.5 x 2 mm~2 and 15 mm. When input intensity is set at 5.6 MW/cm~2, an average output power of 4.6 W is obtained at 589.159 nm. Precise tuning to the sodium D_2 line is accomplished by thermal control of etalons set in the Nd: YAG lasers. The output power at 589.159 nm is stably maintained within ±1.2% for 8 hours.
机译:我们报告了单通道总和频率生成(SFG)中的全固态相干589 nm光源,带有主动锁模Nd:YAG激光器,用于实现钠激光雷达和激光制导星自适应光学器件。 Nd:YAG激光器构造为LD侧泵浦配置,在SFG中以1064和1319 nm的波长运行以产生589 nm的光。使用两个泵浦室可在1064和1319 nm处获得16.5和5.3 W的输出功率。每个腔室由三个80-W-LD阵列组成。单横模TEM_(00);考虑到随着输入LD功率的增加而产生的热透镜效应,通过调节腔长可以达到M〜2〜1.1。空腔长度设置为大约1 m。因此,锁模激光器以大约150MHz的重复速率工作。通过控制在声光锁模器中输入的两个射频之间的相位差,可以实现1064和1319 nm处两个脉冲序列的同步。然后,以37 ps /度的分辨率控制时间延迟。泵浦光束混合在没有抗反射涂层的周期性极化化学计量的钽酸锂(PPSLT)中。晶体的有效孔径和长度为0.5 x 2 mm〜2和15 mm。当输入强度设置为5.6 MW / cm〜2时,在589.159 nm处平均输出功率为4.6W。通过对Nd:YAG激光器中设置的标准具进行热控制,可以精确调节钠D_2线。 589.159 nm的输出功率在8个小时内稳定保持在±1.2%之内。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号