SEPARATION OF IRON FROM A ZINC SULPHATE ELECTROLYTE BY COMBINED LIQUID-LIQUID EXTRACTION AND ELECTRO-REDUCTIVE STRIPPING

摘要

Iron (Ⅲ) can easily and selectively be removed from acidic sulphate solutions with organo-phosphoric acids like Di-2-Ethyl-Hexyl-Phosphoric Acid [D2EHPA]. Stripping of the iron (Ⅲ) loaded organic, however, is difficult, unless highly concentrated inorganic acid solutions are used. In this paper results are shown for the enhanced stripping of iron from loaded D2EHPA by electro-reduction. The loaded solvent is contacted with a 2 M H_2SO_4 solution, which is continuously recycled in an electrochemical reactor where iron (Ⅲ) is reduced to iron(Ⅱ). As iron (Ⅱ) is not extracted by D2EHPA, the equilibrium for iron (Ⅲ)-D2EHPA is shifted towards the aqueous iron (Ⅱ)-sulphuric acid solution. The electro-reduction unit is a vessel with separated catholyte and anolyte chambers. The catholyte is the actual stripping solution where iron (Ⅲ) is reduced to iron (Ⅱ) on a stainless steel electrode. The anolyte is a 2 M H_2SO_4 solution where oxygen is evolved on a lead alloy electrode. A sintered glass plug separates the compartments. With this unit, enhanced stripping of iron from the solvent is possible under mild acid conditions [2 M H_2SO_4], and a concentrated ferrous sulphate solution can be obtained. The results shown have mainly been obtained by studying the parameters affecting the electro-reductive stripping of a D2EHPA loaded organic phase in a batch reactor. From an iron (Ⅲ)-saturated 20 vol. % D2EHPA solvent containing ～12.5 g/l Fe (Ⅲ) over 90% of the iron can be stripped in one stage with a 2 M H_2SO_4 solution at 50℃. It is shown that in this way it should be possible to obtain a concentrated ferrous sulphate solution which can be processed downstream to recover a pure iron product.