首页> 外文会议>Latest advances in information science, circuits and systems >Analysis of a Cylinder-Wire-Cylinder Electrode Configuration during Corona Discharge
【24h】

Analysis of a Cylinder-Wire-Cylinder Electrode Configuration during Corona Discharge

机译:电晕放电过程中的圆柱-线-圆柱电极配置分析

获取原文
获取原文并翻译 | 示例

摘要

A cylinder-wire-cylinder electrode configuration was simulated by implementing open source Finite Element Method Magnetics (FEMM) software. The analysis consisted of two cylinders, one is charged with 1000V, while the other is grounded. Among the two cylinders there is a wire which is charged with 1000V. The maximum and the minimum electric field strength versus the distance between the three electrodes were determined. Field flow pattern has been visualized and the stored energy was measured with the FEMM software.
机译:通过实现开源有限元方法磁学(FEMM)软件模拟了圆柱线-圆柱体电极配置。分析由两个圆柱组成,一个圆柱充满1000V电压,另一个接地。在两个圆柱体之间有一根导线,其电压为1000V。确定了最大和最小电场强度与三个电极之间的距离的关系。场流模式已经可视化,并且使用FEMM软件测量了存储的能量。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号