首页> 外文会议>International Symposium on Forest Industry Wastewater; 20030602-04; Seattle,WA(US) >Pilot-scale comparison of thermophilic aerobic suspended carrier biofilm process and activated sludge process in pulp and paper mill effluent treatment
【24h】

Pilot-scale comparison of thermophilic aerobic suspended carrier biofilm process and activated sludge process in pulp and paper mill effluent treatment

机译:制浆造纸废水中高温好氧悬浮载体生物膜工艺与活性污泥工艺的中试比较

获取原文
获取原文并翻译 | 示例

摘要

Thermophilic aerobic treatment of settled pulp and paper mill effluent was studied under mill premises with two comparative pilot processes; suspended carrier biofilm process (SCBP) and activated sludge process (ASP). Full-scale mesophilic activated sludge process was a reference treatment. During the runs (61 days) hydraulic retention times (HRTs) were kept 13 ± 5 h and 16 ± 6 h for SCBP and ASP, respectively. Corresponding volumetric loadings rates (VLR) were 2.7 ± 0.9 and 2.2 ± 1.0 kg COD_(filt)m~(-3)d~(-1). Temperatures varied between 46 to 60℃ in both processes. Mesophilic ASP was operated with HRT of 36 h, corresponding VLR of 0.7 kg COD_(filt) m~(-3)d~(-1). Both SCBP and ASP achieved COD_(filt) (GF/A filtered) removals up to 85%, while the mesophilic ASP removal was 89 ± 2%. NTU values were markedly higher (100-300) in thermophilic effluents than in mesophilic effluent (30). Effluent turbidity was highly dependent on temperature; in batch experiment mesophilic effluent sample had NTU values of 30 and 60 at 35℃ and 55℃, respectively. As a conclusion, both thermophilic treatments gave high COD_(filt) removals, which were close to mesophilic process removal and were achieved with less than half of HRT.
机译:在工厂前提下,通过两个对比试验过程研究了沉淀纸浆和造纸厂废水的高温好氧处理。悬浮载体生物膜工艺(SCBP)和活性污泥工艺(ASP)。全面的中温活性污泥工艺是一种参考处理。在运行期间(61天),SCBP和ASP的水力停留时间(HRT)分别保持13±5 h和16±6 h。相应的体积负荷率(VLR)为2.7±0.9和2.2±1.0 kg COD_(filt)m〜(-3)d〜(-1)。在这两个过程中,温度在46至60℃之间变化。中温ASP的HRT为36 h,相应的VLR为0.7 kg COD_(filt)m〜(-3)d〜(-1)。 SCBP和ASP均达到高达85%的COD_(filt)(经GF / A过滤)去除率,而中温ASP去除率为89±2%。嗜热废水中的NTU值(100-300)明显高于中温废水(30)。出水浊度高度依赖于温度;在分批实验中,中温废水样品在35℃和55℃的NTU值分别为30和60。结论是,两种高温处理均能实现高COD_(filt)去除,接近中温工艺去除,且仅用不到HRT的一半即可实现。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号