首页> 外文会议>International Conference on Fluidized Bed Combustion; 20050522-25; Toronto(CA) >A NOVEL TECHNIQUE FOR 'IN-SITU' CHARACTERIZATION OF DEVOLATILIZATION RATE OF SOLID FUELS IN FLUIDIZED BEDS
【24h】

A NOVEL TECHNIQUE FOR 'IN-SITU' CHARACTERIZATION OF DEVOLATILIZATION RATE OF SOLID FUELS IN FLUIDIZED BEDS

机译:流化床中固体燃料挥发速率“原位”表征的新技术

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The characterization of volatile matter (VM) emission from solid fuel particles during fluidized bed combustion/gasification is relevant to reactor performance influencing the fate of VM as it results from competing phenomena of release, mixing/segregation and burn-out. The rate and the time-history of volatile matter release strongly affect axial segregation of fuel particles in the bed, favoring the establishment of the stratified combustion regime. On the other hand, the comparison between the devolatilization and radial solids mixing time scales affects the radial distribution of volatile matter across the reactor. Short devolatilization times determine VM release localized near feeding point. The knowledge of devolatilization kinetics, as determined by thermogravimetric analysis, does not take into account key process phenomena such as the effective time-temperature history of the devolatilizing particle. A novel and easy-to-use diagnostic technique for "in-situ" characterization of the devolatilization rate of fuel particles in gas fluidized beds is proposed in the present paper. It is based on the time-resolved measurement of pressure in a bench scale fluidized bed reactor equipped with a calibrated flow restriction at the exhaust. The procedure consists of the injection of a single fuel particle (or small batches of multiple particles) and continuous monitoring of the pressure in the reactor. The bed was kept at a constant temperature by external heating and fluidized with nitrogen. Gas pressure inside the reactor increases during devolatilization as a consequence of the increased flow rate, due to the emission of volatile matter, across the calibrated flow restriction at the exhaust. Experimental data are analyzed in the light of a model of the experiment based on the transient mass balance on the reactor volume referred to the fluidizing gas and to the volatile matter. The comparison between experimental pressure time series and model computations enables the characterization of the kinetic parameters of devolatilization rate for samples of different coals as well as of non-fossil solid fuels.
机译:在流化床燃烧/气化过程中,固体燃料颗粒中挥发性物质(VM)排放的表征与影响VM命运的反应堆性能有关,因为它是由相互竞争的释放,混合/分离和燃尽现象导致的。挥发物释放的速率和时间历史强烈影响床中燃料颗粒的轴向偏析,有利于建立分层燃烧状态。另一方面,脱挥发分和径向固体混合时间尺度之间的比较影响了整个反应器中挥发性物质的径向分布。短的脱挥发分时间决定了VM在局部进料点附近的释放。通过热重分析确定的挥发挥发动力学知识并未考虑关键的过程现象,例如挥发挥发颗粒的有效时间-温度历史。本文提出了一种新颖且易于使用的诊断技术,用于“原位”表征气体流化床中燃料颗粒的挥发度。它基于在台式规模化流化床反应器中压力的时间分辨测量结果,该反应器在排气口配备了校准的流量限制。该程序包括注入单个燃料颗粒(或小批量的多个颗粒)和连续监测反应堆中的压力。通过外部加热将床保持在恒定温度并用氮气流化。由于挥发物的散发,流率经过校准的流量限制时,由于排气流速的增加,在脱挥发分期间反应器内部的气压会增加。根据关于流化气体和挥发性物质的反应器体积上的瞬时质量平衡,根据实验模型分析实验数据。实验压力时间序列与模型计算之间的比较使得能够表征不同煤以及非化石固体燃料样品的挥发度动力学参数。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号