首页> 外文会议>Instrumentation Science and Technology Vol.2 >Simulation and Measurement of Boundary Dose Rate for Mobile Container Inspection System
【24h】

Simulation and Measurement of Boundary Dose Rate for Mobile Container Inspection System

机译:移动式集装箱检查系统边界剂量率的仿真与测量

获取原文

摘要

To simulate the boundary dose rate of the system, a geometrical model was set up according to the real system, and source model was established as well. Some assumptions were taken to simplify the simulation process. Test surface was set along the system boundary. After a relative calculation of statistic results via relative absorbed dose formula, dose rates along the boundary were obtained. Differences between the simulation results and the corresponding measurement results show that this simulation method for dose rate is acceptable, which provide a useful way to simulate dose rate or dose measurement.
机译:为了模拟系统的边界剂量率,根据实际系统建立了几何模型,并建立了源模型。采取了一些假设来简化仿真过程。沿着系统边界设置测试表面。通过相对吸收剂量公式对统计结果进行相对计算后,获得沿边界的剂量率。模拟结果与相应的测量结果之间的差异表明,这种剂量率模拟方法是可以接受的,这为模拟剂量率或剂量测量提供了一种有用的方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号