首页> 外文会议>2019 IEEE 89th Vehicular Technology Conference >Efficient Analog Beamforming with Dynamic Subarrays for mmWave MU-MISO Systems
【24h】

Efficient Analog Beamforming with Dynamic Subarrays for mmWave MU-MISO Systems

机译:适用于mmWave MU-MISO系统的带有动态子阵列的高效模拟波束形成

获取原文
获取原文并翻译 | 示例

摘要

Analog beamformer with large-scale antenna arrays has been widely considered in millimeter wave (mmWave) communication systems because of its superiority in hardware cost and energy consumption compared with traditional fully digital beamforming schemes. In this paper, we introduce an efficient dynamic subarray analog beamforming architecture with lowresolution phase shifters (PSs) for mmWave multiuser multipleinput single-output (MU-MISO) systems. In an effort to mitigate the performance loss due to the use of low- resolution PSs, each user can dynamically select a non-overlap subarray from total transmit antennas and use corresponding subarray analog beamformer to transmit signals. This dynamic subarray analog beamforming architecture can utilize the multi- antenna/multiuser diversities by dynamically adapting to channel state information (CSI) of users. An efficient dynamic subarray analog beamformer design algorithm is also presented, which aims at maximizing the sum-rate of the MU-MISO system. Simulation results demonstrate that the proposed dynamic analog beamforming solution can significantly outperform the conventional fixed-subarray schemes.
机译:具有毫米波天线阵列的模拟波束形成器已经在毫米波(mmWave)通信系统中被广泛考虑,因为与传统的全数字波束形成方案相比,它在硬件成本和能耗上具有优势。在本文中,我们为mmWave多用户多输入单输出(MU-MISO)系统介绍了一种具有低分辨率移相器(PS)的高效动态子阵列模拟波束形成架构。为了减轻由于使用低分辨率PS造成的性能损失,每个用户可以从总发射天线中动态选择一个非重叠子阵列,并使用相应的子阵列模拟波束形成器来发射信号。这种动态子阵列模拟波束成形架构可以通过动态适应用户的信道状态信息(CSI)来利用多天线/多用户分集。提出了一种有效的动态子阵列模拟波束形成器设计算法,旨在最大化MU-MISO系统的求和率。仿真结果表明,所提出的动态模拟波束成形解决方案可以大大优于常规的固定子阵列方案。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号