How many RF chains are optimal for large-scale MIMO systems when circuit power is considered?

摘要

Multiple antennas at the transmitter and the receiver can increase the channel capacity significantly. However, this is at the expense of linearly increasing circuit power consumption due to the use of multiple radio frequency (RF) chains to support the antennas, which is quite significant for large-scale MIMO systems but is largely ignored in the literature. Hence, in this paper, we assess the performance of a point-to-point large-scale MIMO channel considering the overall power consumption on both the transmitter and the receiver, and study the optimal RF chain configurations to maximize the transmission rate under such a total power constraint. Both configurations with and without the channel state information (CSI) of the channel matrix are considered. While the former requires the design of optimal selection of RF chains, the latter only needs to determine the optimal number of RF chains. We find through numerical results that the gain of configuration with CSI over that without CSI diminishes as the dimension of the channel gets large. We also provide guidelines for selecting the optimal number RF chains for configuration without CSI. In particular, for MISO case, we find that it is near-optimal to choose half of the maximum number of transmit RF chains, the circuits of which are affordable to be powered on by the total power budget.