首页> 外文会议>Creep amp; Fracture in High Temperature Components: Design amp; Life Assessment Issues >T/P23,24,911 and 92: New Grades for Advanced Coal-Fired Power Plants - Properties and Experience
【24h】

T/P23,24,911 and 92: New Grades for Advanced Coal-Fired Power Plants - Properties and Experience

机译:T / P23、24、911和92:高级燃煤电厂的新等级-性能和经验

获取原文
获取原文并翻译 | 示例

摘要

After the development of the well-known T/P91 grade in the early 80's and the long industrial experiences since early 90's, it has been necessary to develop new steels to answer the demand of the powergen industry. New (Ultra) Super Critical Boilers require materials with advanced creep properties to reach severe steam parameters. For the 2,25%Cr family, grades 23 and 24 are now available to be used instead of the previous grade 22 with many technical and economical advantages. For the 9%Cr steels, new grades such as T/P911 & T/P92 have been developed with higher creep properties than the T/P91. Thanks to its large industrial experience in these new grades, VALLOUREC & MANNESMANN TUBES and BOEHLER THYSSEN SCHWEISSTECHNIK have now worldwide references of use with these new steel grades. In this paper, information on properties, behaviour and workability will be presented with a focus on: 1. Elevated temperature properties and allowable stresses 2. Oxidation and maximum service temperature 3. Weldability procedures and recommendations.
机译:在80年代初开发出著名的T / P91等级并自90年代初以来积累了长期的工业经验之后,有必要开发新的钢材来满足发电行业的需求。新型(超)超临界锅炉需要具有先进蠕变特性的材料才能达到严格的蒸汽参数。对于具有2,25%Cr的族,现在可以使用23和24级,而不是以前的22级,具有许多技术和经济优势。对于9%Cr钢,已开发出比T / P91具有更高蠕变性能的新牌号,例如T / P911和T / P92。凭借在这些新牌号上的丰富工业经验,VALLOUREC&MANNESMANN TUBES和BOEHLER THYSSEN SCHWEISSTECHNIK现在在这些新牌号上具有全球参考。在本文中,将重点介绍有关性能,行为和可加工性的信息:1.高温特性和允许应力2.氧化和最高使用温度3.可焊接性程序和建议。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号