首页> 外文会议>Conference on Optical Metrology in Production Engineering; 20040427-20040430; Strasbourg; FR >SOME STUDIES TO PREVENT THE PRODUCTION OF SOME TYPES OF MOIRE EFFECTS IN FABRICS
【24h】

SOME STUDIES TO PREVENT THE PRODUCTION OF SOME TYPES OF MOIRE EFFECTS IN FABRICS

机译:防止在织物中产生某些类型的莫尔效应的某些研究

获取原文
获取原文并翻译 | 示例

摘要

The symmetry concerning the fabric pattern is not always suitable for the quality that we expected from fabric textile. The moire effects produced by a periodic structure may be caused by various and diverse factors as folds, lines, etc. The defect that we are concern is bright and dark fringes appearing in the Nylon Fabric are viewed with necked eye, from a particular angle using white light. To prevent these annoying effects, one should be focusing the research basically on geometrical fabric structure, physical, optical and dyeing. We start this work by an exhaustive study made to obtain enough information in order to identify and analyze the problem in order to identify, explain and prevent it appearance. To realize that we may define the factors that causes the phenomena. Concerning the experimental results, we begin with a conventional experiment called "Flat table examination" using Fluorescent white light bulb as types of illumination. We have used as well a microscope examination. It is useful to inspect the fiber and yarns which may have different characteristics of size and form. The light interaction with the fiber will produce especially kind of reflection and absorption. We finish the work by designing and developing an optical system able not only for detecting those kinds of fringes. As well to allow some defects inspection. We believe that some measurements are necessary during some process of fabrication (dyeing, spinning and knitting), at least to reduce this types of defects.
机译:与织物图案有关的对称性并不总是适合于我们期望从织物纺织品获得的质量。周期性结构产生的莫尔条纹效应可能是由多种多样的因素引起的,例如褶皱,线条等。我们关注的缺陷是,使用特殊的角度用颈眼观察尼龙织物中出现的明暗条纹。白光。为了防止这些烦人的影响,应该将研究重点基本上放在织物的几何结构,物理,光学和染色上。我们通过详尽的研究开始这项工作,以获取足够的信息以识别和分析问题,从而识别,解释和防止其出现。为了认识到我们可以定义导致现象的因素。关于实验结果,我们从使用荧光白灯泡作为照明类型的称为“平板检查”的常规实验开始。我们还使用了显微镜检查。检查可能具有不同尺寸和形式特征的纤维和纱线非常有用。与光纤的光相互作用将特别产生反射和吸收。我们通过设计和开发光学系统来完成这项工作,该光学系统不仅能够检测这些条纹。并允许进行一些缺陷检查。我们认为,在某些制造过程中(染色,纺纱和编织)必须进行一些测量,至少可以减少此类缺陷。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号