【24h】

Preparation and Characterization of Ca_(0.8)Sr_(0.2)ZrO_3 Powders Prepared by Soft Chemical Route

机译:软化学法制备Ca_(0.8)Sr_(0.2)ZrO_3粉体的制备与表征

获取原文
获取原文并翻译 | 示例

摘要

Precursors of calcium strontium zirconate (Ca_(0.8)Sr_(0.2)ZrO_3) were synthesized by oxalate copre-cipitation method. TG-DTA was used to characterize the thermal decomposition behaviors of the precursors. The XRD results revealed that the powders crystallized as cubic Ca_(0.8)Sr_(0.2)ZrO_3 with increasing heating temperature up to 1000℃. Calcium strontium zirconate ceramics were obtained under conventional sintering conditions by using the as-prepared Ca_(0.8)Sr_(0.2)ZrO_3 powders. The SEM micrographs of the ceramics sintered at 1450℃ exhibited narrow grain-size distribution with the average grain size around 0.7 μm. The dielectric properties showed that, dielectric constant of the Ca_(0.8)Sr_(0.2)ZrO_3 was about 24.0 and dielectric loss was 0.002 at the frequency of IGHz and the room temperature.
机译:通过草酸盐共沉淀法合成了锆酸锶锶钙(Ca_(0.8)Sr_(0.2)ZrO_3)。 TG-DTA用于表征前体的热分解行为。 X射线衍射(XRD)结果表明,随着加热温度升高到1000℃,粉末结晶为立方Ca_(0.8)Sr_(0.2)ZrO_3。使用制备的Ca_(0.8)Sr_(0.2)ZrO_3粉末,在常规烧结条件下获得锆酸锶锶钙陶瓷。 1450℃烧结的陶瓷的SEM照片显示出较窄的粒度分布,平均粒度约为0.7μm。介电性能表明,在1GHz频率和室温下,Ca_(0.8)Sr_(0.2)ZrO_3的介电常数约为24.0,介电损耗为0.002。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号