首页> 外文会议>Annual Workshop Geothermal Reservoir Engineering; 20040126-28; Stanford,CA(US) >UNIVERSAL CAPILLARY PRESSURE AND RELATIVE PERMEABILITY MODEL FROM FRACTAL CHARACTERIZATION OF ROCK
【24h】

UNIVERSAL CAPILLARY PRESSURE AND RELATIVE PERMEABILITY MODEL FROM FRACTAL CHARACTERIZATION OF ROCK

机译:岩石分形特征的毛细血管万向压力和相对渗透率模型

获取原文
获取原文并翻译 | 示例

摘要

Capillary pressure and relative permeability are important parameters in geothermal reservoir engineering. It is essential to represent capillary pressure curves mathematically in an appropriate way. The Brooks-Corey capillary pressure model has been accepted widely, however it has been found that the Brooks-Corey model cannot represent capillary pressure curves of The Geysers rock samples. In fact, few existing capillary pressure models work for these rock samples. To this end, the porous media were modeled using fractal geometry and a universal capillary pressure model was derived theoretically. It was found that the universal capillary pressure model could be reduced to the frequently-used Brooks-Corey capillary pressure model and the Li-Horne imbibition model when the fractal dimension of the porous media takes a limiting value. This also demonstrates that the Brooks-Corey model and the Li-Horne model, which have been considered to be empirical, have a solid theoretical base. The results demonstrated that the new capillary pressure model could represent the capillary pressure curves of The Geysers rock while the Brooks-Corey model cannot. A relative permeability model was also developed from the universal capillary pressure model. Fractal dimension, a parameter associated with the heterogeneity of the rock, determines the shape of relative permeability curves according to the new relative permeability model. The new model can also be reduced to the Brooks-Corey relative permeability model. The relative permeability data of The Geysers rock were calculated using the typical values of the fractal dimension inferred from the mercury intrusion capillary pressure curves.
机译:毛细管压力和相对渗透率是地热油藏工程中的重要参数。必须以适当的方式数学地表示毛细管压力曲线。 Brooks-Corey毛细压力模型已经被广泛接受,但是已经发现Brooks-Corey模型不能代表Geysers岩石样品的毛细压力曲线。实际上,很少有现有的毛细管压力模型可用于这些岩石样品。为此,使用分形几何模型对多孔介质进行建模,并从理论上推导了通用毛细管压力模型。研究发现,当多孔介质的分形维数为极限值时,通用毛细管压力模型可以简化为常用的Brooks-Corey毛细管压力模型和Li-Horne吸收模型。这也表明被认为是经验性的Brooks-Corey模型和Li-Horne模型具有坚实的理论基础。结果表明,新的毛管压力模型可以代表Geysers岩石的毛管压力曲线,而Brooks-Corey模型则不能。还从通用毛细管压力模型建立了相对渗透率模型。分形维数是与岩石非均质性相关的参数,它根据新的相对渗透率模型确定了相对渗透率曲线的形状。新模型也可以简化为Brooks-Corey相对渗透率模型。使用从汞侵入毛细管压力曲线推断出的分形维数的典型值,可以计算出Geysers岩石的相对渗透率数据。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号