TARGETED BROWNFIELDS ASSESSMENT OF A FORMER POWER PLANT USING THE TRIAD APPROACH

摘要

A Targeted Brownfields Assessment of a former power plant was conducted using the Triad approach, through the efforts of EPA Region I and Metcalf & Eddy, the Brownfields Technology Support Center, and the town of Greenwich, Connecticut. The Triad approach is an integrated strategy for managing decision uncertainty at hazardous waste sites that is being promoted by EPA, along with other Federal agencies. The Triad approach consists of three elements: systematic project planning, real-time measurement technologies, and dynamic work strategies (http://www.triadcentral.org). The Triad approach recognizes that overall decision uncertainty is g enerally governed more by sampling uncertainty (that is, the uncertainty that the samples collected adequately represent site contamination), than by analytical uncertainty (that is, the accuracy and precision of the analytical method) (Crumbling et al., 2001). The town plans to redevelop the nine -acre site as a waterfront park, and needed to decide whether this plan was feasible, and if so, what remedial measures might be necessary before the park could be constructed. Because coal ash was historically disposed at the site, it was considered probable that site surface soil throughout the entire nine acres would show concentrations of contaminants that exceed Connecticut residential direct exposure criteria. Historical information also suggested the possibility of localized petroleum and polychlorinated biphenyl (PCB) releases. The goal of the investigation was to obtain sufficient data, in one mobilization, to determine the nature and extent of surface soil contamination. Attaining this goal was judged to be infeasible using a traditional approach of soil sampling with analyses in off-site laboratories, and evaluation of results several weeks later. The Triad approach, with its focus on development of a conceptual site model, evaluation of decision uncertainty, use of field/real -time analytical methods, and field decision -making, was selected over a traditional approach. Field analytical te chniques included siteLAB~® test kits for total petroleum hydrocarbons (TPH ) and total polyaromatic hydrocarbons (PAHs), EPA's X-ray fluorescence instrument for metals , and the EPA mobile laboratory for PCBs. Soil samples were also analyzed by an off-site laboratory for arsenic with 48-hour turnaround. Sampling locations were added based on feedback from the field analyses. The use of field methods allowed for sampling using a random -grid approach, with many more locations sampled than would have been possible by relying solely on the more costly off-site laboratory analyses.