首页> 外文会议>American Society of Mechanical Engineers(ASME) Turbo Expo vol.5 pt.B; 20040614-17; Vienna(AT) >AN AVERAGE-PASSAGE EMPIRICAL CLOSURE MODEL FOR CENTRIFUGAL COMPRESSORS
【24h】

AN AVERAGE-PASSAGE EMPIRICAL CLOSURE MODEL FOR CENTRIFUGAL COMPRESSORS

机译:离心压缩机的平均通量经验关闭模型

获取原文
获取原文并翻译 | 示例

摘要

Applying the novel time-and passage-averaging operators, a reduced average-passage equation system is derived to remove the bodyforce and the blockage factor in Adamczyk's average-passage equations. Like the Reynolds-averaged Navier-Stokes equations the average-passage flow model does not contain sufficient information to determine its solution. Based on the rich throughflow analysis for axial-flow turbomachinery and numerous studies for centrifugal compressors, a semi-empirical model of the deterministic stress is developed for centrifugal compressors in the present study. Finally, the empirical model coupled with the interface approach is applied to predict the time-averaged flow field in a tested centrifugal compressor stage and the results are compared with experimental data. Using the same computational grids, the computational cost with the empirical model is slightly more than that with the mixing plane model, and a good agreement was obtained between the numerical results and experimental data.
机译:应用新颖的时间和通过平均算子,推导了简化的平均通过方程系统,以消除Adamczyk的平均通过方程中的力和阻塞因子。像雷诺平均Navier-Stokes方程一样,平均流模型也没有足够的信息来确定其解。基于对轴流涡轮机的丰富通流分析以及对离心压缩机的大量研究,在本研究中,开发了确定性应力的半经验模型。最后,将经验模型与接口方法相结合,以预测经过测试的离心压缩机级的时间平均流场,并将结果与​​实验数据进行比较。使用相同的计算网格,经验模型的计算成本比混合平面模型的计算成本略高,并且在数值结果和实验数据之间取得了良好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号