【24h】

NATURAL GAS DECARBONISATION TECHNOLOGIES FOR ADVANCED POWER PLANTS

机译:先进电厂的天然气去碳技术

获取原文
获取原文并翻译 | 示例

摘要

In this paper two options for H_2 production, by means of natural gas, are presented and their performances are evaluated when they are integrated with advanced H_2/air cycles. In this investigation two different schemes have been analysed: an advanced combined cycle power plant (CC) and a new advanced mixed cycle power plant (AMC). The two methods for producing H_2 are as follows: 1. steam methane reforming: it is the simplest and potentially the most economic method for producing hydrogen in the foreseeable future; 2. partial oxidation of methane: it could offer an energy advantage because this method reduces energy requirement of the reforming process. These hydrogen production plants require material and energetic integrations with power section and the best interconnections must be investigated in order to obtain good overall performance. With reference to thermodynamic and economic performance, significant comparisons have been made between the above introduced reference plants. An efficiency decrease and an increase in the cost of electricity has been obtained when power plants are equipped with a natural gas decarbonisation section. The main results of the performed investigation are quite variable among the different H_2 production technologies here considered: the efficiency decreases in a range of 5.5 percentage points to nearly 10 for the partial oxidation of the natural gas and in a range of 8.8 percentage points to over 12 for the steam methane reforming. The electricity production cost increases in a range of about 41-42% for the first option and in a range of about 34-38% for the second one. The AMC, coupled with partial oxidation, stands out among the other power plant solutions here analysed because it exhibits the highest net efficiency and the lowest final specific CO_2 emission. In addition to this, economic impact is favourable when AMC is equipped with systems for H_2 production based on partial oxidation of natural gas.
机译:在本文中,提出了两种通过天然气生产H_2的方法,并结合了先进的H_2 /空气循环对它们的性能进行了评估。在这项调查中,分析了两种不同的方案:先进的联合循环发电厂(CC)和新的先进的混合循环发电厂(AMC)。产生H_2的两种方法如下:1.蒸汽甲烷重整:在可预见的将来,这是最简单且可能是最经济的生产氢气的方法; 2.甲烷的部分氧化:由于该方法降低了重整过程的能量需求,因此可以提供能量优势。这些制氢厂需要与动力部分进行材料和能量整合,必须研究最佳互连,以获得良好的整体性能。关于热力学和经济性能,在上述引入的参考工厂之间进行了重大比较。当电厂配备有天然气脱碳段时,效率会降低并且电费会增加。在这里考虑的不同H_2生产技术中,进行的研究的主要结果差异很大:对于天然气的部分氧化,效率下降5.5个百分点至近10个百分点,超过8.8个百分点。 12用于蒸汽甲烷重整。第一种选择的电力生产成本增加约41-42%,第二种选择的电力生产成本增加约34-38%。 AMC加上部分氧化,在本文分析的其他发电厂解决方案中脱颖而出,因为它显示出最高的净效率和最低的最终特定CO_2排放量。除此之外,当AMC配备了基于天然气部分氧化的H_2生产系统时,经济影响是有利的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号