首页> 外文会议>2018 3rd International Conference on Smart and Sustainable Technologies >A Beam Steering Transmitter Prototype for IOT Communications
【24h】

A Beam Steering Transmitter Prototype for IOT Communications

机译:用于物联网通信的波束控制发射器原型

获取原文
获取原文并翻译 | 示例

摘要

This paper discusses the design, implementation and evaluation of a phased array transmitter for Internet of Things communications based on the local oscillator (LO) phase shifting approach. The proposed architecture is made up of a four channel LO synthesizer, a radio frequency (RF) frontend module and a linear array of patch antennas. The LO synthesizer is based on a revised DDS-PLL architecture, is centered at 2.453-GHz and implements mutual phase shifts among its output channels in the [0°; 360°] range with an 8-bit resolution. The RF frontend module performs the intermediate frequency (IF) signal up-conversion (at 3.350-GHz) and all signal conditioning operations required to drive the antennas. Actual measurements are reported at block- and system- level.
机译:本文讨论了基于本振(LO)相移方法的物联网通信用相控阵发射机的设计,实现和评估。所提出的架构由四通道LO合成器,射频(RF)前端模块和贴片天线的线性阵列组成。本振合成器基于改进的DDS-PLL架构,中心频率为2.453-GHz,并在其[0°; 360°]范围,分辨率为8位。 RF前端模块执行中频(IF)信号上变频(在3.350 GHz)和驱动天线所需的所有信号调节操作。实际测量值在模块和系统级别报告。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号