首页> 外文会议>2017 International Conference on Electron Devices and Solid-State Circuits >A terahertz ring hybrid coupler based on parallel plate dielectric waveguide with signal line for a ballistic deflection transistor travelling wave amplifier
【24h】

A terahertz ring hybrid coupler based on parallel plate dielectric waveguide with signal line for a ballistic deflection transistor travelling wave amplifier

机译:基于带信号线的平行板介电波导的太赫兹环混合耦合器,用于弹道偏转晶体管行波放大器

获取原文
获取原文并翻译 | 示例

摘要

In this paper, a new design of Terahertz (THz) Ring Hybrid Coupler Based on Parallel Plate Dielectric Waveguide with Signal Line inserted (PPDWS) is proposed. The PPDWS is a simple transmission line, easy to fabricate, with a low average loss of 0.45dB/mm at 1-1.4THz, and designed to be implemented into the THz Ring Hybrid Coupler Design. We employ (3N+1.5)λ for the circumference of the Ring Hybrid Coupler for a fundamental mode of TE10. ANSYS HFSS simulations show S21=S41=-4.5dB, S31<; -20dB, S11<;-20dB at 1.022THz. We obtain an excellent isolation between split ports for signal transmission, and a very good signal cancellation on port3. The coupler and PPDWS line are planned for use in the Terahertz Ballistic Deflection Transistor Travelling Wave Amplifier; however, the design is also capable of being applied to other very high frequency applications.
机译:本文提出了一种基于带信号线插入的平行板介质波导的太赫兹(THz)环形混合耦合器的新设计。 PPDWS是一条简单的传输线,易于制造,在1-1.4THz时平均损耗低至0.45dB / mm,设计用于THz环形混合耦合器设计。对于TE10的基本模式,我们对环形混合耦合器的周长采用(3N + 1.5)λ。 ANSYS HFSS仿真显示S21 = S41 = -4.5dB,S31 <; -20dB,S11 <;在1.022THz时为-20dB。我们在分离端口之间获得了出色的隔离,以进行信号传输,并在端口3上实现了非常好的信号消除。耦合器和PPDWS线计划用于太赫兹弹道偏转晶体管行波放大器;但是,该设计也能够应用于其他非常高频的应用。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号