3n) slotted patch t'/> Proposal of wide bandwidth and very miniaturized having dimension of μm range slotted patch THz microstrip antenna using PBG substrate and DGS
首页> 外文会议>2017 20th International Conference of Computer and Information Technology >Proposal of wide bandwidth and very miniaturized having dimension of μm range slotted patch THz microstrip antenna using PBG substrate and DGS
【24h】

Proposal of wide bandwidth and very miniaturized having dimension of μm range slotted patch THz microstrip antenna using PBG substrate and DGS

机译:使用PBG基板和DGS的宽带宽和非常小型化的微米级缝隙贴片THz微带天线的建议

获取原文
获取原文并翻译 | 示例

摘要

In this paper, a wide bandwidth (26.4 GHz) and very small sized (180×210×10 μmn3n) slotted patch terahertz (THz) rectangular microstrip antenna using photonic band gap (PBG) substrate and defected ground structure (DGS) has been proposed and analyzed. At first a very compact with dimension of μm range rectangular microstrip patch antenna (RMPA) was designed by using computer simulation technology microwave studio (CST-MWS) at the operating frequency of 0.685 THz, which shows return loss of -30.552 dB, wide bandwidth of about 26 GHz, gain of 5.145 dBi, directivity of 6.727 dBi and VSWR of 1.061. Then we introduced PBG structure as substrate by creating same distant as well as same sized air gaps on the substrate. In that case the performance of the antenna is improved significantly than the previous one. Its return loss decreased to -38.973 dB at resonating frequency 0.701 THz. Its gain and directivity get increased to 5.156 dBi and 6.833 dBi respectively. Bandwidth is also enhanced compared to the previous one with a VSWR of 1.023. Next we have done some experiment by creating defects in ground plane. We optimized the dimensions of the defects and got better performance of the antenna having 0.704 THz resonant frequency with more minimized return loss of -47.862. Gain of this antenna is 5.090 dBi and directivity is increased to 6.835 dBi. Its VSWR is of 1.008 with the improved bandwidth. Finally, we have made some circular slots on the radiating patch and got best results. The final design of antenna resonates at center frequency of 0.703 THz with a return loss of -50.948 dB. The gain and directivity of the proposed antenna are of 5.075 dBi and 6.833 dBi respectively. The antenna shows VSWR of 1.006 which is very much close to unity (1) with the enhanced bandwidth compared to the all previously designed antenna.
机译:在本文中,宽带宽(26.4 GHz)和小尺寸(180×210×10μmn3n)提出了使用光子带隙(PBG)衬底和缺陷接地结构(DGS)的缝隙贴片太赫兹(THz)矩形微带天线,并且分析。首先,使用计算机仿真技术微波工作室(CST-MWS)在0.685 THz的工作频率下设计了尺寸为μm的非常紧凑的矩形微带贴片天线(RMPA),其回波损耗为-30.552 dB,宽带宽频率约为26 GHz,增益为5.145 dBi,方向性为6.727 dBi,VSWR为1.061。然后,我们通过在基板上创建相同距离和相同大小的气隙来引入PBG结构作为基板。在那种情况下,天线的性能比以前的天线有了很大的提高。在谐振频率0.701 THz时,其回波损耗降至-38.973 dB。其增益和方向性分别增加到5.156 dBi和6.833 dBi。 VSWR为1.023,带宽也比以前的带宽有所增强。接下来,我们通过在接地层中创建缺陷进行了一些实验。我们优化了缺陷的尺寸,并获得了谐振频率为0.704 THz的天线的更好性能,而最小的回波损耗为-47.862。该天线的增益为5.090 dBi,方向性增加至6.835 dBi。其VSWR为1.008,具有改进的带宽。最后,我们在散热贴片上制作了一些圆形插槽,并获得了最佳效果。天线的最终设计在0.703 THz的中心频率产生谐振,回波损耗为-50.948 dB。拟议天线的增益和方向性分别为5.075 dBi和6.833 dBi。该天线的VSWR为1.006,与以前设计的所有天线相比,带宽提高了很多,非常接近于单位(1)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号