首页> 外文会议>2016 3rd International Conference on Green Technology and Sustainable Development >Elaboration and Investigation on Photoluminescence Enhancement of Poly (Vinyl Alcohol) Mn2+ Doped ZnS Quantum Dots for Security Ink Applications
【24h】

Elaboration and Investigation on Photoluminescence Enhancement of Poly (Vinyl Alcohol) Mn2+ Doped ZnS Quantum Dots for Security Ink Applications

机译:用于安全油墨的聚(乙烯醇)Mn2 +掺杂的ZnS量子点的光致发光增强作用的研究和研究

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Quantum dots (QDs) ink from Mn2+-doped ZnS (ZnS:Mn2+) quantum dots with poly(vinyl alcohol) (PVA) as stabilizer has been synthesized by two steps. First, ZnS:Mn2+ quantum dots were prepared by chemical co-precipitation method at room temperature and second, the powder of ZnS:Mn2+ quantum dots was dispersed in a solution of poly(vinyl alcohol) (PVA), de-ionized water, and alcohol to achieve a stable ink formulation. The ZnS:Mn2+ quantum dots exhibited both blue trap-state emission at around 430 nm and a strong orangered emission at about 600 nm with an excitation wavelength of 325 nm. The structural and optical properties of the ZnS:Mn2+ quantum dots were characterized by X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Visible absorption spectrum and photoluminescence (PL) spectroscopy. XRD analysis showed the formation of cubic ZnS:Mn2+ particles with average sizes from 2.0 to 2.53 nm while the particle size was estimated to be 10 nm from transmission electron microscopy (TEM). The ZnS:Mn2+ quantum dots ink was printed on photographic paper using screen technique. The studied result indicated that the ZnS:Mn2+ quantum dots can be used in the ink printing of security documents and labels, light - emitting diodes (LEDs), in novel photoluminescent display and advertising.
机译:通过两步合成了以聚乙烯醇(PVA)为稳定剂的,掺杂Mn2 +的ZnS(ZnS:Mn2 +)量子点的量子点(QDs)墨水。首先,在室温下通过化学共沉淀法制备ZnS:Mn2 +量子点,其次,将ZnS:Mn2 +量子点的粉末分散在聚乙烯醇(PVA),去离子水和酒精以达到稳定的油墨配方。 ZnS:Mn2 +量子点在约430 nm处表现出蓝色陷阱态发射,在约600 nm处表现出强烈的橙红色发射,激发波长为325 nm。 ZnS:Mn2 +量子点的结构和光学性质通过X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),紫外可见吸收光谱和光致发光(PL)光谱进行了表征。 XRD分析显示形成了平均尺寸为2.0至2.53nm的立方ZnS:Mn2 +颗粒,而根据透射电子显微镜(TEM)估计该颗粒尺寸为10nm。使用丝网技术将ZnS:Mn2 +量子点油墨印刷在相纸上。研究结果表明,ZnS:Mn2 +量子点可用于安全文件和标签,发光二极管(LED)的油墨印刷,新型光致发光显示器和广告中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号