【24h】

Optical, dielectric and photocatalytic properties of perovskite ZnTiO3 nanoparticle synthesized by sonochemical process

机译:声化学法合成钙钛矿型ZnTiO 3 纳米粒子的光学,介电和光催化性能

获取原文
获取原文并翻译 | 示例

摘要

The sonochemical method was employed for synthesizing perovskite zinc titanate nanopowders. The yield powders were calcined at 600-900°C for 2 h. High crystallinity phase of cubic ZnTiO was obtained at calcination temperature of 600°C while mixing phase of cubic and hexagonal was observed in the sample calcined at 700°C. For the samples calcined at 800 and 900°C, the hexagonal structure was dominant phase with a trace of rutile TiO and spinel ZnTiO phase. X-ray absorption near edge spectroscopy technique (XANES) was used to probe crystal and local structure of the synthesized powders. The samples calcined at 700°C exhibited the superior photocatalytic performance in decolorization of Rhodamine B dye under ultraviolet irradiation within 75 min. The dielectric permittivity and loss tangent of ZnTiO calcined at 700°C was found to be 20 and <;10. Effect of calcination temperature on structural, morphology, optical, dielectric properties and photocatalytic activity were also investigated and discussed.
机译:采用声化学方法合成钙钛矿钛酸锌纳米粉。将所得粉末在600-900℃下煅烧2小时。在600℃的煅烧温度下获得立方晶ZnTiO的高结晶相,而在700℃煅烧的样品中观察到立方相和六方晶的混合相。对于在800和900°C下煅烧的样品,六边形结构为主要相,并带有痕量金红石TiO和尖晶石ZnTiO相。 X射线吸收近边缘光谱技术(XANES)被用来探测合成粉末的晶体和局部结构。在700°C下煅烧的样品在75分钟的紫外线照射下对若丹明B染料的脱色表现出优异的光催化性能。发现在700℃下煅烧的ZnTiO的介电常数和损耗角正切为20且≤10。还研究了煅烧温度对结构,形态,光学,介电性能和光催化活性的影响。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号