首页> 外文会议>2015 International Conference on Industrial Instrumentation and Control >Energy efficient cluster based approach for data collection in wireless sensor networks with multiple mobile sink
【24h】

Energy efficient cluster based approach for data collection in wireless sensor networks with multiple mobile sink

机译:具有多个移动接收器的基于节能集群的无线传感器网络中数据收集方法

获取原文
获取原文并翻译 | 示例

摘要

A wireless sensor network could be either homogeneous network or heterogeneous network. Depending upon the nature of application requirements a wireless sensor node could either be static or mobile one. When the nodes are static, data collection by the sink from various sources will be difficult and time consuming process. Also static deployment of sink as well as source nodes lead to energy hole problem because the nodes in one hop neighbor of sink must always be active to transmit the data from the sources down to it. This energy hole problem leads to network partition and reduction in life time of any wireless sensor network. So, to increase the lifetime of a wireless sensor network and energy efficient routing mobile sink based approach could be used. Due to the mobility of sink data collection will be carried out faster in time and energy hole problem could be eliminated. Introduction of a single mobile sink also leads to a problem like coverage area, time delay due to obstacles, interference or limited entry and pause time, time synchronization between the source and sink, link failure or node failure and so on. By considering the residual energy of each node and reliable data transfer in a wireless sensor network a new cluster based approach using controlled flooding is proposed with multiple mobile sink for prolonging the life time of a wireless sensor network. Irrespective of the medium this approach uses predetermined and controlled mobility model for determining the direction of movement for mobile sink. This approach uses some set of rules for path reconstruction phase with limited flooding of update message consisting of current location of the sink and Time Of Arrival (TOA). Simulation result shows that the multiple mobile sink with reduced reconstruction of route has improved the energy efficiency and increased lifetime of wireless sensor network.
机译:无线传感器网络可以是同构网络或异构网络。根据应用要求的性质,无线传感器节点可以是静态的也可以是移动的。当节点是静态的时,接收器从各种来源收集数据将是困难且耗时的过程。此外,接收器以及源节点的静态部署也会导致能量漏洞,因为接收器的一跳邻居中的节点必须始终处于活动状态才能将数据从源向下传输到接收器。这个能量漏洞问题导致网络划分,并缩短任何无线传感器网络的使用寿命。因此,为了增加无线传感器网络的寿命,可以使用基于能源效率的路由移动接收器方法。由于接收器的移动性,数据收集将在时间上更快地进行,并且可以消除能量孔问题。引入单个移动接收器还会导致诸如覆盖区域,由于障碍物引起的时间延迟,干扰或进入和暂停时间有限,源与接收器之间的时间同步,链路故障或节点故障等问题。通过考虑无线传感器网络中每个节点的剩余能量和可靠的数据传输,提出了一种使用可控泛洪的基于群集的新方法,该方法具有多个移动接收器,以延长无线传感器网络的寿命。不管使用哪种介质,该方法都使用预定的受控移动性模型来确定移动接收器的移动方向。该方法在路径重构阶段使用一组规则,其中更新消息的泛洪量有限,包括更新的当前位置和到达时间(TOA)。仿真结果表明,减少路径重构的多移动接收器提高了能量效率,并延长了无线传感器网络的使用寿命。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号