首页> 外文会议>2014 International Conference amp; Utility Exhibition on Green Energy for Sustainable Development >Thermal characteristics in turbulent channel flows with V-baffle vortex generators
【24h】

Thermal characteristics in turbulent channel flows with V-baffle vortex generators

机译:V型折流涡流发生器在湍流通道中的热特性

获取原文
获取原文并翻译 | 示例

摘要

Experimental work has been performed to examine the effects of V-baffle vortex generators on the heat transfer and friction characteristics in a channel under a constant heat flux boundary condition. In the experiments, V-baffles at different pitch ratios (PR=P/e = 4.0, 6.0 and 8.0) were carried out. Measurements were carried out for a channel of one aspect ratio, AR = W/H = 4.0 and duct height, H= 40 mm with baffle height, e = 8 mm. Experiments were conducted for the Reynolds number range of 6000 to 22,000. The distributions of temperature and local Nusselt number on bottom channel wall were observed with thermochromic liquid crystal (TLC) sheet. Isothermal friction factors were also taken and presented. The obtained results demonstrate that heat transfer increases with the increase of Reynolds number, whereas friction factor (f) shows the opposite trend. Experimental results also show that the channels with V-baffle at the highest pitch ratio (PR = 8.0) provide highest heat transfer than others.
机译:已经进行了实验工作,以研究在恒定热通量边界条件下V型折流涡流发生器对通道中的传热和摩擦特性的影响。在实验中,以不同的螺距比(PR = P / e = 4.0、6.0和8.0)进行了V形挡板。对一个长径比为AR = W / H = 4.0且通道高度为H = 40 mm(挡板高度为e = 8 mm)的通道进行了测量。针对雷诺数范围为6000至22,000进行了实验。用热致变色液晶(TLC)片观察底部通道壁上的温度和局部Nusselt数的分布。还记录了等温摩擦系数。所得结果表明,传热随着雷诺数的增加而增加,而摩擦系数(f)则呈现相反的趋势。实验结果还表明,具有最高节距比(PR = 8.0)的V型挡板的通道提供了最高的传热效率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号