首页> 外文会议>2014 International Conference on Green Computing Communication and Electrical Engineering >Comparison slotted meander line resonators and P-EBG structures in microstrip patch antennas with isolation enhancement for WiMAX applications
【24h】

Comparison slotted meander line resonators and P-EBG structures in microstrip patch antennas with isolation enhancement for WiMAX applications

机译:比较带隔离增强功能的微带贴片天线中缝隙曲折线谐振器和P-EBG结构,适用于WiMAX应用

获取原文
获取原文并翻译 | 示例

摘要

Microstrip patch antennas with mutual coupling are proposed for WiMAX applications. To reduce mutual coupling between patch antennas using different methods like Split Ring Resonators (SRR), Slotted Meander Line Resonators (SMLR), Wave Guided Metamaterials (WG-MTM) and Planar-Electromagnetic Band Gap (P-EBG) structures are designed for WiMAX applications. In all four methods, antennas are engraved on 15×10 mm FR4 substrate. The antenna is designed by applying FR4 substrate with thickness 3mm, permittivity 4.6. The proposed antennas are modeled using ADS software. The simulated result shows that the proposed antennas are optimized for 5.8 GHz resonant frequency. By comparing all four methods Split Ring Resonators only having more isolation of −37.5 dB and the return loss of −16.5 dB. The characteristics like return loss, radiation pattern, gain, directivity etc. are computed for all the designed antennas. These features show that the proposed patch antenna with SRR structure is well suited for WiMAX application compared to other three methods.
机译:具有互耦合的微带贴片天线被提议用于WiMAX应用。为了减少贴片天线之间的相互耦合,采用了分裂环谐振器(SRR),开槽曲折线谐振器(SMLR),波导超材料(WG-MTM)和平面电磁带隙(P-EBG)结构等不同方法设计用于WiMAX应用程序。在所有四种方法中,天线均刻在15×10 mm FR4基板上。通过使用厚度为3mm,介电常数为4.6的FR4基板来设计天线。拟议的天线是使用ADS软件建模的。仿真结果表明,所提出的天线针对5.8 GHz谐振频率进行了优化。通过比较所有四种方法,裂环谐振器的隔离度仅为-37.5 dB,回波损耗为-16.5 dB。对于所有设计的天线,都会计算出回波损耗,辐射方向图,增益,方向性等特性。这些特征表明,与其他三种方法相比,所建议的具有SRR结构的贴片天线非常适合WiMAX应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号