首页> 外文会议>2014 International Conference on Advances in Engineering and Technology Research >Tunable notched planar bandpass filter for ultra wideband applications
【24h】

Tunable notched planar bandpass filter for ultra wideband applications

机译:可调谐陷波平面带通滤波器,用于超宽带应用

获取原文
获取原文并翻译 | 示例

摘要

This paper proposes a compact and tunable notch ultrawide band bandpass filter. We used the interdigital resonator for designing this filter. Using interdigital finger resonator we are getting the ultrawide band with one notch and due to diode we are getting the second notch. When diode is in OFF state we are getting one notch at 7.75GHz and in ON state we are getting the two notches one the previous one and second at 4.5GHz. The notches are removing the interference due to satellite systems in UWB band. The size of filter is compact with dimension 17 × 17 X 1 mm with the ground plane. For designing of this structure FR-4 substrate of thickness 1 mm and dielectric constant 4.9 is used. Simulation and analysis of this structure is done on the electromagnetic simulation software, computer simulation technology microwave studio (CST MWS). The proposed filter is working for whole UWB band from 3.1 to 10.6GHz and rejecting the frequencies 4.5GHz and 7.75GHz. The insertion loss of first notch band is -17dB and and for second notched band insertion loss is -14dB.
机译:本文提出了一种紧凑且可调的陷波超宽带带通滤波器。我们使用叉指式谐振器来设计该滤波器。使用叉指式谐振器,我们获得了一个缺口的超宽带,而由于二极管,我们获得了第二个缺口。当二极管处于截止状态时,我们在7.75GHz处获得一个缺口,而在导通状态时,我们获得的两个缺口在4.5GHz处获得一个缺口,而第二个缺口则处于4.5GHz。这些缺口正在消除由于UWB频段的卫星系统引起的干扰。过滤器尺寸紧凑,与接地平面的尺寸为17×17 X 1 mm。为了设计该结构,使用了厚度为1mm且介电常数为4.9的FR-4衬底。该结构的仿真和分析是在电磁仿真软件,计算机仿真技术微波工作室(CST MWS)上完成的。所提出的滤波器适用于从3.1到10.6GHz的整个UWB频带,并拒绝了4.5GHz和7.75GHz的频率。第一陷波带的插入损耗为-17dB,第二陷波带的插入损耗为-14dB。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号