首页> 外文会议>2014 1st International Conference on 5G for Ubiquitous Connectivity >An in-band full-duplex transceiver prototype with an in-system automated tuning for RF self-interference cancellation
【24h】

An in-band full-duplex transceiver prototype with an in-system automated tuning for RF self-interference cancellation

机译:带内全双工收发器原型,具有用于射频自干扰消除的系统内自动调谐

获取原文
获取原文并翻译 | 示例

摘要

This paper presents a transceiver prototype capable of in-band full duplex communication. Apart from a conventional transceiver and antenna, this prototype relies on a tunable electrical balance duplexer to minimize the in-band self-interference at RF. Such duplexer however requires continuous-time tuning to ensure accurate impedance balancing with the antenna across different environmental conditions. An automatic tuning algorithm is presented which tracks antenna impedance variations and tunes the duplexer accordingly. This tuning operates on a standard compliant training sequence to minimize the overhead on the communication system. The implemented tuning mechanism does not require any additional RF or analog hardware, and maximally re-uses the digital resources of a conventional baseband processor. The full duplex prototype was validated in a wireless link for IEEE802.11 channels in the 2.4GHz ISM band, in which the error vector magnitude improves by 15dB as the RF self-interference cancellation increased from 25dB to 45dB.
机译:本文提出了一种能够进行带内全双工通信的收发器原型。除了传统的收发器和天线之外,该原型还依赖于可调电平衡双工器,以最大程度地减小RF的带内自干扰。然而,这种双工器需要连续时间调谐以确保在不同环境条件下与天线的精确阻抗平衡。提出了一种自动调谐算法,该算法跟踪天线阻抗变化并相应地调谐双工器。该调整以符合标准的训练序列进行,以最大程度地减少通信系统的开销。实施的调谐机制不需要任何额外的RF或模拟硬件,并且可以最大程度地重用常规基带处理器的数字资源。全双工原型在无线链路中针对2.4GHz ISM频段的IEEE802.11通道进行了验证,其中,随着RF自干扰消除从25dB增加到45dB,误差矢量幅度提高了15dB。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号