首页> 外文会议>IEEE Wireless Communications and Networking Conference;WCNC 2010 >Design and Implementation of a Decentralized Positioning System for Wireless Sensor Networks
【24h】

Design and Implementation of a Decentralized Positioning System for Wireless Sensor Networks

机译:无线传感器网络分散定位系统的设计与实现

获取原文
获取原文并翻译 | 示例

摘要

In terms of the location-aware applications for wireless sensor networks, it is crucial to improve the measurement reliability of the received physical signal as well as the target positioning and tracking performance in a real environment. In the localization process, reflection, scattering, and other physical phenomena have a negative impact on the measurement reliability and the estimation accuracy at local sensor nodes. In this paper, we describe using a particle filter to increase the received signal strength (RSS) measurement reliability of each local sensor node and then use the least mean squares (LMS) algorithm to estimate the path loss exponent of the distance-dependent path loss model in our laboratory environment. Using the Industrial Technology Research Institute (ITRI) sensor platform, the experimental results show that the proposed LMS-based method can reduce the average noise variance by approximately 1 dB. Then the filtered RSS samples and the estimated path loss exponent are applied in the proposed weighted sign algorithm (WSA), which are implemented in the ITRI sensor platform for target position-ing and tracking in our laboratory surroundings. The location estimation of a target is formulated as a weighted least squares (WLS) problem, and then is solved based on the WSA in an iterative and decentralized manner. Experimental results demonstrate that the proposed WSA-based positioning and tracking scheme achieves a maximum error distance of approxi-mately 1.7 meters, average error distances of approximately 0.96 meters (positioning case) and 1.38 meters (tracking case), which are not far from those obtained from computer simulations (0.67 meters and 0.91 meters, respectively).
机译:就无线传感器网络的位置感知应用而言,至关重要的是提高实际环境中接收到的物理信号的测量可靠性以及目标定位和跟踪性能。在定位过程中,反射,散射和其他物理现象会对本地传感器节点处的测量可靠性和估计精度产生负面影响。在本文中,我们描述了使用粒子滤波器来提高每个本地传感器节点的接收信号强度(RSS)测量可靠性,然后使用最小均方(LMS)算法来估计与距离相关的路径损耗的路径损耗指数在我们实验室环境中的模型。使用工业技术研究院(ITRI)传感器平台,实验结果表明,基于LMS的方法可以将平均噪声方差降低大约1 dB。然后将滤波后的RSS样本和估计的路径损耗指数应用于建议的加权符号算法(WSA),该算法在ITRI传感器平台中实现,用于在我们实验室环境中进行目标定位和跟踪。将目标的位置估计公式化为加权最小二乘(WLS)问题,然后基于WSA以迭代和分散的方式求解。实验结果表明,所提出的基于WSA的定位和跟踪方案实现了大约1.7米的最大误差距离,大约0.96米(定位情况)和1.38米(跟踪情况)的平均误差距离,通过计算机模拟获得(分别为0.67米和0.91米)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号