首页> 外文会议>10th International Conference on Nuclear Engineering, Vol.1, Apr 14-18, 2002, Arlington, Virginia >GENERIC AGING MANAGEMENT PROGRAMS FOR LICENSE RENEWAL OF BWR REACTOR COOLANT SYSTEM COMPONENTS
【24h】

GENERIC AGING MANAGEMENT PROGRAMS FOR LICENSE RENEWAL OF BWR REACTOR COOLANT SYSTEM COMPONENTS

机译:BWR反应器冷却剂系统组件许可更新的通用老化管理程序

获取原文
获取原文并翻译 | 示例

摘要

The paper reviews the existing generic aging management programs (AMPs) for the reactor coolant system (RCS) components in boiling water reactors (BWRs), including the reactor pressure vessel and internals, the reactor recirculation system, and the connected piping. These programs have been evaluated in the U.S. Nuclear Regulatory Commission (NRC) report, Generic Aging Lessons Learned (GALL), NUREG-1801, for their use in the license renewal process to manage several aging effects, including loss of material, crack initiation and growth, loss of fracture toughness, loss of preload, wall thinning, and cumulative fatigue damage. The program evaluation includes a review of ten attributes (scope of program, preventive actions, parameters monitored/inspected, detection of aging effects, monitoring and trending, acceptance criteria, corrective actions, confirmative process, administrative control, and operating experience) for their effectiveness in managing a specific aging effect in a given component(s). The generic programs are based on the ASME Section XI inservice inspection requirements; industry guidelines for inspection and evaluation of aging effects in BWR reactor vessel, internals, and recirculation piping; monitoring and control of BWR water chemistry; and operating experience as reported in the USNRC generic communications and industry reports. The review concludes that all generic AMPs are acceptable for managing aging effects in BWR RCS components during an extended period of operation and do not need further evaluation. However, the plant-specific programs for managing aging in certain RCS components during an extended period of operation do require further evaluation. For some plant-specific AMPs, the GALL report recommends an aging management activity to verify their effectiveness. An example of such an activity is a one-time inspection of Class 1 small-bore piping to ensure that service-induced weld cracking is not occurring in the piping. Several of the AMPs, which do not require further evaluation, do need enhancements to allow for an extended period of reactor operation. The paper concludes that the GALL report systematically evaluates the generic AMPs for their effectiveness during an extended period of operation and provides a technical basis for their acceptance. The use of the GALL report should facilitate both preparation of a license renewal application and timely and uniform review by the NRC staff.
机译:本文回顾了沸水反应堆(BWR)中反应堆冷却剂系统(RCS)组件的现有通用老化管理程序(AMPs),包括反应堆压力容器和内部构件,反应堆再循环系统以及连接的管道。这些程序已在美国核监管委员会(NRC)的报告《通用老化经验教训》(GALL)NUREG-1801中进行了评估,以用于许可证更新过程中,以管理多种老化效应,包括材料损失,裂纹萌生和破裂。增长,断裂韧性丧失,预紧力损失,壁变薄和累积疲劳损伤。计划评估包括对十项属性的有效性的评估(计划范围,预防措施,监视/检查的参数,老化影响的检测,监视和趋势,验收标准,纠正措施,确认过程,行政控制和操作经验)在管理给定组件中的特定老化效果方面。通用程序基于ASME第XI部分在役检查要求;检查和评估BWR反应堆容器,内部构件和再循环管道中的老化影响的行业准则;监测和控制BWR水化学;以及USNRC通用通讯和行业报告中报告的操作经验。审查得出的结论是,所有通用AMP均可在较长的运行时间内用于管理BWR RCS组件中的老化效应,因此无需进一步评估。但是,用于管理某些RCS组件在长时间运行中的老化的特定于工厂的程序确实需要进一步评估。对于某些特定于工厂的AMP,GALL报告建议进行老化管理活动以验证其有效性。此类活动的一个示例是一次性检查1类小口径管道,以确保不会在管道中发生因服务引起的焊接裂纹。某些不需要进一步评估的AMP确实需要进行改进,以允许延长反应堆的运行时间。本文的结论是,GALL报告系统地评估了通用AMP在长期运行中的有效性,并为接受它们提供了技术基础。使用GALL报告应有助于NCL工作人员准备许可证更新申请和及时统一的审查。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号