您现在的位置: 首页> 研究主题> 变速成图

变速成图

变速成图的相关文献在1994年到2022年内共计129篇,主要集中在石油、天然气工业、测绘学、地球物理学 等领域,其中期刊论文116篇、会议论文8篇、专利文献113029篇;相关期刊51种,包括石油天然气学报、石油地质与工程、海洋石油等; 相关会议7种,包括中国石油学会第八届青年学术年会、SPG/SEG2011年国际地球物理会议、中国石油学会2010年物探技术研讨会等;变速成图的相关文献由367位作者贡献,包括易远元、景海璐、许海涛等。

变速成图—发文量

期刊论文>

论文:116 占比:0.10%

会议论文>

论文:8 占比:0.01%

专利文献>

论文:113029 占比:99.89%

总计:113153篇

变速成图—发文趋势图

变速成图

-研究学者

  • 易远元
  • 景海璐
  • 许海涛
  • 雷卫兵
  • 张水山
  • 张营革
  • 查树贵
  • 王楠
  • 吕世超
  • 宋亮
  • 期刊论文
  • 会议论文
  • 专利文献

搜索

排序:

年份

    • 毛云新; 娄敏; 王伟; 涂齐催; 黄鑫; 李炳颖
    • 摘要: A气田构造南部和北部地震速度横向变化较大,需要利用变速成图来分析地层真实构造形态。通过各向异性的深度域速度建模和基于深变子波的深度域井震标定得到深度地震数据体,再进行构造解释、井点深度校正,最终得到变速构造图。相比于常速成图,变速成图对应气、水边界与强振幅匹配度更好,井点校正误差更小,计算的动、静储量更匹配。新钻A–B7井钻后证实,变速成图可靠性高,钻前深度预测误差在4 m以内。A气田变速成图较常速成图能更加客观地描述地下真实的构造形态,更好地进行深度预测,指导调整井钻前深度预测。
    • 涂齐催; 娄敏; 毛云新; 王伟; 黄鑫; 李炳颖; 王腊梅; 陈易周
    • 摘要: 时深转换是构造解释关键步骤之一,时深转换方法主要包括常速成图与变速成图两大类。常速成图操作简单,应用普遍,但不适合速度场横向变化剧烈的工区。建立一种适应速度场横向变化且符合工区地质及油气藏特征的时深转换方法,是本研究探讨的重点。迭代变速成图技术基于叠加速度反演,综合了流体检测成果,通过不断优化速度场开展变速成图,能较准确地预测地下复杂构造的深度,该方法刻画的构造油气藏含气范围与流体检测分布一致,实现了同一油气藏的分布在不同地震信息维度下的耦合。利用迭代变速成图技术,较好解决了A气田钻前构造气藏面积与“亮点”展布范围之间的矛盾,统一了地质油藏认识,扩大了地质储量,有效推动了A气田的挖潜与调整,实现了增储上产。
    • 赵佳奇; 韩文明; 刘志国; 赵红岩; 冯鑫; 孔令武; 王嘉
    • 摘要: 以西非毛塞几比盆地为例,介绍了盆地演化与地层结构特征,总结了盆地裂陷后期宏观地层速度特征,剖析了影响盆地速度分布的因素.研究表明:盆地地层速度具有平面上"西北深水区低,东南陆架区高"、纵向上"两段式"的分布特征,而影响盆地速度分布的主要因素是埋深和压实作用、地层岩性组成、地层地质年代厚度组合关系等.鉴于毛塞几比盆地面积广、无连片三维地震、井震资料有限、多种三维速度建模方法适用性差的现实情况,提出了利用分区井控插值与变速拟合剥层法构建层速度模型的方法,首先基于地震解释方案,通过纵向分层、横向分区构建速度模型单元,然后利用井速度插值或变速拟合方法进行模型速度赋值,最后经剥层计算实现盆地尺度的变速成图.利用大尺度时深转换成果实现了从宏观角度对该盆地横向构造、地层变化规律更准确的认识以及对该盆地烃源灶更可靠的预测,同时也实现了快速发现和落实盆地深水、陆架坡折带构造圈闭的目标.为低勘探程度盆地大尺度变速成图提供了借鉴.
    • 陈华靖; 张鹏志; 任百聪; 贾海良
    • 摘要: 时深转换及构造成图是连接地球物理和地质研究的桥梁, 其准确程度对油田高效开发具有重大意义.对于底水油藏的开发而言, 时深转换的精度更是制约水平井成功与否的关键.Q油田经过十多年的注水开发, 底水突破严重, 水淹程度高, 调整井部署时油柱高度相对较低, 油田开发难度加大, 地质油藏方案对构造研究的准确程度提出了更高的需求.针对这一问题, 根据储层地震响应特征, 提出了基于加密解释与自动追踪相结合的井-震-藏联合微幅构造解释技术, 探索改进了精细的层控速度建模和应用外部漂移克里金算法的构造成图技术, 通过上述两项技术的有力结合, 极大地提高了微幅构造的研究精度, 为开发井的部署实施提供了借鉴, 后续开发井的实施也验证了该项研究的准确性.%Time depth conversion and structural mapping are the bridges of Geophysics to geological research, and the accuracy is of great significance to the efficient development of oilfields. For the development of bottom water reservoir, the accuracy of time depth conversion is the key to the success of horizontal well. Q oilfield has been used in water injection stage for more than 10 years. The water cone breakthrough is serious, and the flooding is high. The oil column height is relatively low when the adjustment wells are deployed, so it is difficult for the oil field development. The accuracy of structural map is placing a heavier demand for geological research. In order to solve this problem, a delicate research flow is established. According to the seismic reflection of reservoir characteristics, the well-seismic-reservoir integrated interpretation is presented based on effective infilled interpretation and automatic tracking. To accurately implement the micro structure, surface controlled velocity modeling and external drift Kriging algorithm for mapping is explored. The workflow provides a strong support for the development of well deployment and implementation. The accuracy of the research is verified by the further development well.
    • 于静芳
    • 摘要: 由于玉北地区研究程度及勘探程度均较低,钻井少,无法进行有效的井点速度控制,明显制约了该区油气勘探的进程.寻找一种适合特定区块的科学的速度建场方法并准确求取地震速度变得越来越重要.选取A1井三维工区,根据工区构造高陡叠加、样式复杂等构造特点,选用了模型层析法和Dix公式法进行了速度建场,并对2种方法的应用效果进行对比分析,认为模型层析法在本地区更为适用.
    • 查树贵; 刘利平; 廖朋; 吴娜珠; 崔志恒; 周从业
    • 摘要: 涪陵页岩气田晚奥陶世五峰组早志留世龙马溪组(O3w-S1l)页岩气层经过多期构造运动改造,地层变形强烈,断裂、褶皱发育,地层产状变化剧烈,给页岩气水平井导向带来了极大挑战.为保证水平井轨迹在优质页岩气层中穿行,提出了基于导向模型实时修正的水平井地震地质导向技术.在区域地质特征研究的基础上,以地震剖面为初始导向模型,综合钻井、录井、测井等多种数据信息,开展标志层特征分析、实时小层精细对比和速度场实时更新,建立了靶点深度和地层产状的预测方法,保证了精准入靶,形成了水平井井眼轨迹实时跟踪调整技术,确保了水平井井眼轨迹在优质页岩气层中穿行.实践证明,水平井地震地质导向技术有效指导了水平井钻井,为涪陵页岩气田的高效开发提供了技术保障.%Owing to multistage tectonic movements,shale gas reservoir O3w~S1l in the Fuling shale gas field has been highly deformed,and fractures and folds have developed.The seismic geo-steering drilling technology for horizontal wells encounters challenges owing to substantial change in the occurrence of this formation.To increase the rate at which high-quality shale formations are encountered during drilling,the seismic geo-steering drilling technology for horizontal wells based on a real-time correction model is presented.First,based on regional geological feature analysis,characteristics of the guiding bed were analyzed,and a real time fine substratum correlation was conducted.Second,by taking the seismic section as the initial geo-steering model,with comprehensive use of drilling and well logging,the velocity field was updated in real time.Then,the target depth and formation occurrence were predicted,and a real-time trajectory tracking and adjustment technique for horizontal wells was established,ensuring the trajectory of horizontal wells passing through high-quality shale gas reservoirs.The practice indicated that the seismic geosteering technology guided the drilling of horizontal wells in the Fuling shale gas field effectively.
    • 张水山; 熊晓军; 刘阳; 李翔
    • 摘要: 分析现有层速度求取方法发现,常规方法构建的层速度场无法满足页岩气勘探中水平井钻探对构造层位的精度要求,为此,提出了一种基于叠加速度、测井数据、构造解释数据、地震数据等多源信息和不同层速度计算方法(Dix公式方法、模型层析方法和波阻抗反演方法等)的综合信息三维层速度建场方法.首先,根据测井数据的起始深度将地层分为上、下段地层,对上段地层采用3种常规的基于叠加速度和构造解释数据的层速度计算方法计算层速度,对下段地层采用基于三维叠后地震数据、测井数据和层位数据的波阻抗反演方法计算层速度;然后,进行上、下段地层的层速度组合和优选分析,充分利用波阻抗反演得到的高分辨率层速度的优点,优选出研究区的最佳组合层速度.涪陵页岩气田实例计算结果表明,基于该层速度场得到的深度构造图与钻井实测的页岩地层深度误差小,可以有效应用于后续的勘探开发工作,表明所提出的综合信息三维层速度建场方法具有重要的实际应用价值.%The velocity field produced by conventional methods does not meet the accuracy requirement for the detection of struc-ture and formations in horizontal well drilling in shale gas exploration.In this paper,we present a 3D interval velocity field building method based on comprehensive analysis of the following data:stacking velocity,logging data,structural interpretation results and seismic data.We adopted several techniques for estimating the interval velocity for the proposed method,namely,the Dix formula, the constrained Dix formula,model tomography,and wave impedance inversion.First,we divided the formation into upper and low-er strata according to the initial depth of logging data.Then,for the upper strata,we use the first three conventional techniques mentioned above to estimate its interval velocity based on stacking velocity and structural interpretation results.We use the wave impedance inversion for the lower strata to obtain its interval velocity based on 3D post-stack seismic data,logging data,and struc-tural interpretation results.Finally,we combine the upper velocities estimated via the three techniques and the inverted lower veloc-ity.We then select the best combined interval velocity in the study area.This method takes advantage of the high-resolution wave impedance inversion.The test results of seismic data in the Fuling shale gas field showed the decrease in depth error between the depth structure map from the velocity field obtained using the proposed method and the shale formation depth measured by drill-ing,which indicates that this method is practical for the exploration and development in the Fuling shale gas field.
    • 蔡少武; 张新涛; 张京思; 于娅; 刘腾; 李颖
    • 摘要: 渤中凹陷BZ1探区Qa构造两口钻井在相距1.3 km的实钻过程中出现了速度异常,三维地震资料时间剖面地层深度与钻井地质分层深度出现了不一致的矛盾现象,即新钻井Qa-3井的钻井预测深度相对于本井地质分层深度更深,速度相对于Qa 2井变小,因而两口井地震速度在横向分布上出现了明显差异.分析表明,速度异常主要由沉积和构造共同作用所引起.利用地震叠加速度谱建模,通过井点速度场、趋势种子点进行校正,获取到更加准确的地下速度,并进行高精度变速成图,能够真实反映地下构造.对比单井速度预测钻井深度与单井速度场校正速度谱建模速度场预测钻井深度,并对比其误差精度,可以看出后者有效地解决了实际钻探过程中因速度异常而导致预测深度误差偏大的问题.因此钻前进行速度场建模与变速构造成图,对今后勘探井或评价井的部署及钻井深度精确预测具有重要的指导作用.
  • 查看更多

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号