The Effect of Preheating on Notched Tensile Strength and Impact Toughness of Ti-6Al-6V-2Sn Laser Welds

摘要

Notched tensile strength (NTS) and impact toughness were determined for Ti-6Al-6V-2Sn laser welds subjected-post-weld heat treatment (PWHT) at distinct temperatures. In this study, the specimens were either preheated at 300°C or maintained at room temperature before laser welding. The preheated weld, associated with a reduced cooling rate, had obviously lower hardness than the non-preheated weld in the as-welded condition. After PWHT at 482°C for 3 h, the preheated weld also exhibited considerably lower hardness than the non-preheated weld. In general, preheating at 300°C could effectively increase the NTS and impact toughness of Ti-6Al-6V-2Sn laser welds. The preheated weld in the as-welded condition had superior NTS-other welds being tested. On the other hand, the welds after PWHT at 704°C possessed the best resistance-unstable impact fracture, regardless of preheating. Usually, the coarse α + β structures together with intergranular α were responsible for the high NTS and impact toughness of the weld.