Application of catalytic hydropyrolysis for the rapid preparation of lignin concentrates from wood

摘要

The use of hydropyrolysis (hypy) is described as a potentially rapid procedure for obtaining lignin-enriched residues from wood for either simply estimating lignin content or for performing stable isotope ratio measurements. Hypy was carried out on samples of oak wood and, as reference materials, Klason lignin and pure cellulose over the temperature range of 200-500 degreesC. The composition of the residues were assessed by solid-state C-13 NMR. At 300 and 350 degreesC, the extents of conversion achieved for cellulose was 88 and 95% respectively, indicating that highly lignin-enriched residues should be obtained for wood samples. This was confirmed by solid-state C-13 NMR which also indicated that any remaining cellulose had aromatised to a significant extent. In addition, hypy caused quite extensive demethylation of methoxyl functionalities and cleavage of the characteristic beta-O-4 ether lignin linkage. Finally, correcting the 300 and 350 degreesC hypy residues for residual cellulose gave estimates of the lignin content for oak wood in close agreement with those obtained by the Klason method and by solid-state C-13 NMR. At 350 degreesC, the residual cellulose accounts for ca. 30% of the lignin concentrate obtained from hypy. (C) 2003 Elsevier Ltd. All rights reserved. [References: 35]