...
首页> 外文期刊>Engineering Geology >The Tsaoling landslide triggered by the Chi-Chi earthquake, Taiwan: Insights from a discrete element simulation
【24h】

The Tsaoling landslide triggered by the Chi-Chi earthquake, Taiwan: Insights from a discrete element simulation

机译:台湾集集地震引发的曹岭滑坡:离散元模拟的启示

获取原文
获取原文并翻译 | 示例
           

摘要

In the village of Tsaoling (in Yunlin County, Taiwan), a major landslide was triggered by the Chi-Chi earthquake in 1999 with more than 125 X 10~6 m~3 of rock displaced. The kinematic behaviour of this landslide is simulated using a 2D discrete element model (PFC2D code). Our numerical model is composed of discs bonded together. The initial boundary conditions are applied along the ball-wall contacts by using derived velocities integrated from the strong motion data with a duration of 160 s including the peak acceleration near Tsaoling. The constraints are mainly issued from the final geometry of the landslide including its capacity to cross the river valley and reach a significant elevation on the opposite mountain flank. They also result from a variety of geological and hydrological observations, including the local levels of material disruption and the location of survivors. Our modelling thus indicates that a low-friction coefficient (about 0.15) and a medium strength are required to account for the actual landslide characteristics. A self-lubrication mechanism probably accounts for the low residual friction. Our model also suggests that the maximum velocity of sliding reached 50 m/s, a result that cannot be checked in the absence of actual measurements. In addition to friction, the strength of sliding block is of special importance because it controlled the possibility for the upper layer fragments to roll and get buried, and hence the probability of survival.
机译:在台湾云林县曹岭村,一次严重的山体滑坡是由1999年的集集地震引发的,造成了超过125 X 10〜6 m〜3的岩石位移。使用2D离散元素模型(PFC2D代码)模拟了该滑坡的运动学特征。我们的数值模型由粘合在一起的圆盘组成。通过使用从强运动数据中积分的推导速度沿球壁接触施加初始边界条件,持续时间为160 s,包括Tsaoling附近的峰值加速度。约束主要来自滑坡的最终几何形状,包括其穿越河谷并在对面的山坡处达到明显高度的能力。它们也是来自各种地质和水文观测的结果,包括当地的物质破坏水平和幸存者的位置。因此,我们的建模表明需要低摩擦系数(约0.15)和中等强度才能说明实际的滑坡特征。自润滑机制可能是造成残留摩擦低的原因。我们的模型还建议最大滑动速度达到50 m / s,在没有实际测量的情况下无法检查这一结果。除摩擦外,滑块的强度特别重要,因为它控制着上层碎片滚动和被掩埋的可能性以及生存的可能性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号