...
首页> 外文期刊>Applied optics >SIMPLE ANALYTICAL MODEL OF BIAS DEPENDENCE OF THE PHOTOCURRENT OF METAL-SEMICONDUCTOR-METAL PHOTODETECTORS
【24h】

SIMPLE ANALYTICAL MODEL OF BIAS DEPENDENCE OF THE PHOTOCURRENT OF METAL-SEMICONDUCTOR-METAL PHOTODETECTORS

机译:金属-半电子-金属光电检测器光电流的偏置依存性的简单分析模型

获取原文
获取原文并翻译 | 示例
           

摘要

The current-voltage (I-V) characteristics of metal-semiconductor-metal (MSM) photodetectors under various light intensities are examined. The current shows an initial increase followed by saturation and a subsequent sharp increase as bias increases. We propose a theoretical model for bias dependence in all regions of operation except for breakdown, based on drift collection of carriers in the depleted regions under the contacts and diffusion and recombination in the undepleted region. This is based on the solution of the diffusion equation in the undepleted area between the two contacts of the MSM structure. The solution is subject to boundary conditions on excess minority carriers at the cathode end and continuity of current at the anode end. The latter is written in terms of a parameter, denoted as effective diffusion length, which describes the collection efficiency of carriers at the anode. The closed-form solution thus derived corroborates with physical expectations in several limiting cases. To compare theory with experiment, we propose methods to extract parameters that are used to normalize the I-V curves and calculate depletion widths under different light intensities, from current- and capacitance-voltage measurements. A close match between experimental and theoretical results is observed, and possible breakdown mechanisms are discussed. (C) 1996 Optical Society of America [References: 19]
机译:研究了金属-半导体-金属(MSM)光电探测器在各种光强度下的电流-电压(I-V)特性。电流显示出先是增加,然后是饱和,随后随着偏置的增加而急剧增加。我们基于接触下的耗尽区中载流子的漂移收集以及未耗尽区中的扩散和复合,提出了一种理论模型,用于除击穿以外的所有操作区域中的偏压依赖性。这是基于在MSM结构的两个触点之间的未耗尽区域中的扩散方程式的解。该溶液在阴极端受到过量少数载流子的边界条件的影响,在阳极端受到电流连续性的约束。后者用表示有效扩散长度的参数表示,该参数描述了阳极处载流子的收集效率。这样得出的封闭形式的解决方案在几种极限情况下符合物理期望。为了将理论与实验进行比较,我们提出了一些方法来提取参数,这些参数用于对I-V曲线进行归一化,并根据电流和电容电压测量值来计算不同光强度下的耗尽宽度。观察到实验和理论结果之间的紧密匹配,并讨论了可能的故障机理。 (C)1996年美国眼镜学会[参考文献:19]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号