...
首页> 外文期刊>Applied optics >Beam-profile modulation of thulium laser radiation applied with multimode fibers and its effect on the threshold fluence to vaporize water
【24h】

Beam-profile modulation of thulium laser radiation applied with multimode fibers and its effect on the threshold fluence to vaporize water

机译:掺多模光纤的laser激光辐射的光束轮廓调制及其对气化水阈值通量的影响

获取原文
获取原文并翻译 | 示例
           

摘要

The threshold fluences at which vaporization is initiated at the tip of a multimode fiber that is submerged in water were investigated when free-running and Q-switched thulium laser pulses (λ=2.01 μm) were applied with different pulse energies. We focused on the quantification of temporal and spatial fluence modulations of the beam profile at the tip of a 400-μm fiber. The spatial and the temporal fluence peaks over the average fiuence were measured to as high as 1.5 and 4 in the Q-switched mode, respectively, and 2.5 and 40 in the free-running mode, respectively. The fluence peaks significantly influence the vaporization process. An increase in the threshold fluence with increasing pulse energy was found for the Q-switched mode, but there was a decrease for the free-running mode. Pressure transients of the order of 1 kbar and temperatures higher than 200℃ were calculated for a 30-mJ Q-switched laser pulse at the onset of vaporization. Collecting all the data allowed us to trace the thermodynamic path of rapid heating and vaporization in a phase diagram of water.
机译:当对自由运行和Q开关的laser激光脉冲(λ= 2.01μm)施加不同的脉冲能量时,研究了浸没在水中的多模光纤尖端处引发汽化的阈值通量。我们专注于量化400μm光纤尖端的光束轮廓的时空注量调制。在Q切换模式下,平均通量上的空间和时间通量峰分别测量为1.5和4,在自由运行模式下分别为2.5和40。通量峰显着影响汽化过程。对于Q开关模式,发现阈值通量随脉冲能量的增加而增加,但是对于自由运行模式,阈值通量却有所降低。在汽化开始时,对于30mJ调Q激光脉冲,计算出了1 kbar量级的压力瞬变和200℃以上的温度。收集所有数据使我们能够在水的相图中追踪快速加热和蒸发的热力学路径。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号